EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Aging Test and Sealing Performance of Thermoplastic Vulcanizate as Sealing Gasket in Automotive Fuel Cell Applications

Hyungu Im iD, Sunkyoung Jeoung

Polymers · 13.04.2023 · 15 (8) · 1872

DOI: 10.3390/polym15081872 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 13.04.2023. Verfasst von Hyungu Im und 1 weiteren Autor:innen. Beteiligte Einrichtung: Material Technology R&D Division, Korea Automotive Technology Institute, Cheonan-si 31214, Republic of Korea. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Trade, Industry and Energy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ethylene–propylene–diene monomer (EPDM) rubber is one of the rapidly developing synthetic rubbers for use as a gasket material in proton exchange membrane (PEM) fuel cell applications. Despite its excellent elastic and sealing properties, EPDM faces challenges such as molding processability and recycling ability. To overcome these challenges, thermoplastic vulcanizate (TPV), which comprises vulcanized EPDM in polypropylene matrix, was investigated as a gasket material for PEM fuel cell applications. TPV showed better long-term stability in terms of tension and compression set behaviors under accelerated aging conditions than EPDM. Additionally, TPV exhibited significantly higher crosslinking density and surface hardness than EPDM, regardless of the test temperature and aging time. TPV and EPDM showed similar leakage rates for the entire range of test inlet pressure values, regardless of the applied temperature. Therefore, we can conclude that TPV exhibits a similar sealing capability with more stable mechanical properties compared with commercialized EPDM gaskets in terms of He leakage performance.

Schlagwörter

Stichwörter der Autor:innen

EPDM/TPVfuel cellmechanical ageingsealing performancethermoplastic vulcanizate

Autor:innen und Institutionen

  • Material Technology R&D Division, Korea Automotive Technology Institute, Cheonan-si 31214, Republic of Korea.

ORCID-Profile: Hyungu Im

Förderung

  • Ministry of Trade, Industry and Energy

Zitieren

APA

Im, H., & Jeoung, S. (2023). Mechanical Aging Test and Sealing Performance of Thermoplastic Vulcanizate as Sealing Gasket in Automotive Fuel Cell Applications. Polymers, 15(8), 1872. https://doi.org/10.3390/polym15081872

Vancouver

Im H, Jeoung S. Mechanical Aging Test and Sealing Performance of Thermoplastic Vulcanizate as Sealing Gasket in Automotive Fuel Cell Applications. Polymers. 2023;15(8):1872. doi:10.3390/polym15081872

BibTeX
@article{Im2023,
  author = {Im, Hyungu and Jeoung, Sunkyoung},
  title = {Mechanical Aging Test and Sealing Performance of Thermoplastic Vulcanizate as Sealing Gasket in Automotive Fuel Cell Applications},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {8},
  pages = {1872},
  doi = {10.3390/polym15081872}
}
Kostenlos starten →