EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Structural and Thermal Characteristics of Buriti Tree Gum (Mauritia flexuosa)

Diego Aires da Silva iD, Davi do Socorro Barros Brasil, Edinaldo José de Sousa Cunha, Giselle Cristine Melo Aires, Renato Araújo da Costa iD, José de Arimatéia Rodrigues do Rego, Rosinelson da Silva Pena iD

Polymers · 27.03.2023 · 15 (7) · 1662

DOI: 10.3390/polym15071662 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 27.03.2023. Verfasst von Diego Aires da Silva und 6 weiteren Autor:innen. Beteiligte Einrichtung: Food Technology Department, Natural Science and Technology Center (CCNT), University of Pará State (UEPA), Belém 66050-540, PA, Brazil. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação Amazônia de Amparo a Estudos e Pesquisas (FAPESPA, Brazil), State University of Pará, 10th Amendment to the Technical and Financial Cooperation Agreement.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A polysaccharide was isolated from the exudate of a buriti tree trunk (Mauritia flexuosa). The molecular structure, thermal stability, morphology, crystallinity, and elemental composition of the product were investigated through spectroscopic techniques, such as Fourier-transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR 1H and 13C), and energy-dispersive X-ray spectroscopy (EDS); thermogravimetric analysis (TG), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and X-ray diffraction (XRD). In addition to NMR molecular modeling studies, were performed to confirm the 1H and 13C chemical shifts to Gal and Xyl conformers. Buriti tree gum (BG) is an arabinogalactan, containing Rha, Ara, Xyl, and Gal, and degrades almost completely (98.5%) at 550 °C and has a maximum degradation peak at 291.97 °C, with a mass loss of 56.33%. In the temperature range of 255–290 °C, the energy involved in the BG degradation process was approximately 17 J/g. DSC indicated a glass transition temperature of 27.2 °C for BG, which had an irregular and heterogeneous morphology, with smooth or crumbling scaly regions, demonstrating the amorphous nature of BG that was confirmed by the XRD standard. EDS revealed the presence of carbon and oxygen, as well as calcium, magnesium, aluminum, silicon, chlorine, and potassium, in the BG composition.

Schlagwörter

Stichwörter der Autor:innen

Mauritia flexuosahydrocolloidspolysaccharidesspectroscopythermal analysis

Autor:innen und Institutionen

  • Food Technology Department, Natural Science and Technology Center (CCNT), University of Pará State (UEPA), Belém 66050-540, PA, Brazil.
  • Chemical Engineering Faculty (FEQ), Institute of Technology (ITEC), Federal University of Pará (UFPA), Belém 66075-110, PA, Brazil.
  • Graduate Program in Food Science and Technology (PPGCTA), Institute of Technology (ITEC), Federal University of Pará (UFPA), Belém 66075-110, PA, Brazil.

ORCID-Profile: Diego Aires da Silva, Renato Araújo da Costa, Rosinelson da Silva Pena

Förderung

  • Fundação Amazônia de Amparo a Estudos e Pesquisas (FAPESPA, Brazil)
  • State University of Pará
  • 10th Amendment to the Technical and Financial Cooperation Agreement
  • Sustainable Scientific Technical Development Program

Zitieren

APA

da Silva, D. A., Brasil, D. D. S. B., Cunha, E. J. S., Aires, G. C. M., da Costa, R. A., do Rego, J. A. R., & Pena, R. D. S. (2023). Structural and Thermal Characteristics of Buriti Tree Gum (Mauritia flexuosa). Polymers, 15(7), 1662. https://doi.org/10.3390/polym15071662

Vancouver

da Silva DA, Brasil DDSB, Cunha EJS, Aires GCM, da Costa RA, do Rego JAR, et al. Structural and Thermal Characteristics of Buriti Tree Gum (Mauritia flexuosa). Polymers. 2023;15(7):1662. doi:10.3390/polym15071662

BibTeX
@article{daSilva2023,
  author = {da Silva, Diego Aires and Brasil, Davi do Socorro Barros and Cunha, Edinaldo José de Sousa and Aires, Giselle Cristine Melo and da Costa, Renato Araújo and do Rego, José de Arimatéia Rodrigues and Pena, Rosinelson da Silva},
  title = {Structural and Thermal Characteristics of Buriti Tree Gum (Mauritia flexuosa)},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {7},
  pages = {1662},
  doi = {10.3390/polym15071662}
}
Kostenlos starten →