Microscale and Macroscale Deformation Behavior of Electrospun Polymeric Nanofiber Membranes Using In Situ SEM during Mechanical Testing
Polymers · 24.03.2023 · 15 (7) · 1630
DOI: 10.3390/polym15071630 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 24.03.2023. Verfasst von Olivier Verschatse und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials, Textiles and Chemical Engineering (MaTCh), Faculty of Engineering and Architecture, Ghent University, Technologiepark 70A, 9…. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Foundation - Flanders, Research Foundation – Flanders, Special Research Fund Ghent University (BOF).
Abstract (Originalsprache)
Electrospun nanofiber membranes show high potential in various application fields (e.g., filtration, catalysis, and sensing). Nevertheless, knowledge of the mechanical behavior, and more specifically, the deformation of nanofiber membranes is still limited today which can complicate the appliance of nanofiber membranes in applications where they are mechanically loaded. In this paper, we, therefore, analyzed the mechanical behavior of polymeric nanofiber membranes with different fiber orientations (random and aligned) extensively. Polyamide 6 was used as a representative reference polymer for proof-of-concept. Mechanical tests show that all membranes have a coherent deformation behavior at the macroscale up to the point of fracture. Large variations in stiffness, ultimate strength, and ultimate strain were observed between membranes with different fiber orientations (Random: E-mod: 370 ± 34 MP; UTS: 38.5 ± 6.0 MPa; εmax: 30.0 ± 2.8%; Parallel aligned: E-mod: 753 ± 11 MPa; UTS: 55.4 ± 0.8 MPa; εmax: 12.0 ± 0.1%; Perpendicular aligned: E-mod: 24.1 ± 3.7 MPa; UTS:/; εmax: >40%). This shows the versatility and tunability of the mechanical behavior of these nanofiber membranes. At the microscale, the fibrous structure results in deformation mechanisms that resist failure formation and progression when the membrane is mechanically loaded. This results in a high fracture resistance, even for pre-damaged membranes. Realignment of the fibers along the loading direction causes crack tip blunting, locally reinforcing the membrane.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials, Textiles and Chemical Engineering (MaTCh), Faculty of Engineering and Architecture, Ghent University, Technologiepark 70A, 9052 Ghent, Belgium.
ORCID-Profile: Eva Loccufier, Karen De Clerck, Lode Daelemans
Förderung
- Research Foundation - Flanders
- Research Foundation – Flanders
- Special Research Fund Ghent University (BOF)
Zitieren
APA
Verschatse, O., Loccufier, E., Swanckaert, B., De Clerck, K., & Daelemans, L. (2023). Microscale and Macroscale Deformation Behavior of Electrospun Polymeric Nanofiber Membranes Using In Situ SEM during Mechanical Testing. Polymers, 15(7), 1630. https://doi.org/10.3390/polym15071630
Vancouver
Verschatse O, Loccufier E, Swanckaert B, De Clerck K, Daelemans L. Microscale and Macroscale Deformation Behavior of Electrospun Polymeric Nanofiber Membranes Using In Situ SEM during Mechanical Testing. Polymers. 2023;15(7):1630. doi:10.3390/polym15071630
BibTeX
@article{Verschatse2023,
author = {Verschatse, Olivier and Loccufier, Eva and Swanckaert, Bianca and De Clerck, Karen and Daelemans, Lode},
title = {Microscale and Macroscale Deformation Behavior of Electrospun Polymeric Nanofiber Membranes Using In Situ SEM during Mechanical Testing},
journal = {Polymers},
year = {2023},
volume = {15},
number = {7},
pages = {1630},
doi = {10.3390/polym15071630}
}
EUVIMED