EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modulation of the Lower Critical Solution Temperature of Thermoresponsive Poly(N-vinylcaprolactam) Utilizing Hydrophilic and Hydrophobic Monomers

Elaine Halligan iD, Shuo Zhuo iD, Declan Mary Colbert, Mohamad Alsaadi iD, Billy Shu Hieng Tie iD, Gilberto S N Bezerra iD, Gavin Keane, Luke M Geever iD

Polymers · 23.03.2023 · 15 (7) · 1595

DOI: 10.3390/polym15071595 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 23.03.2023. Verfasst von Elaine Halligan und 7 weiteren Autor:innen. Beteiligte Einrichtung: Polymer, Recycling, Industrial, Sustainability and Manufacturing (PRISM) Center, Technological University of the Shannon: Midlands Midwest, Dublin Ro…. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Advanced Materials and BioEngineering Research, SFI Centre for Advanced Materials and BioEngineering Research.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Four-dimensional printing is primarily based on the concept of 3D printing technology. However, it requires additional stimulus and stimulus-responsive materials. Poly-N-vinylcaprolactam is a temperature-sensitive polymer. Unique characteristics of poly-N-vinylcaprolactam -based hydrogels offer the possibility of employing them in 4D printing. The main aim of this study is to alter the phase transition temperature of poly-N-vinylcaprolactam hydrogels. This research focuses primarily on incorporating two additional monomers with poly-N-vinylcaprolactam: Vinylacetate and N-vinylpyrrolidone. This work contributes to this growing area of research by altering (increasing and decreasing) the lower critical solution temperature of N-vinylcaprolactam through photopolymerisation. Poly-N-vinylcaprolactam exhibits a lower critical solution temperature close to the physiological temperature range of 34–37 °C. The copolymers were analysed using various characterisation techniques, such as FTIR, DSC, and UV-spectrometry. The main findings show that the inclusion of N-vinylpyrrolidone into poly-N-vinylcaprolactam increased the lower critical solution temperature above the physiological temperature. By incorporating vinylacetate, the lower critical solution temperature dropped to 21 °C, allowing for potential self-assembly of 4D-printed objects at room temperature. In this case, altering the lower critical solution temperature of the material can potentially permit the transformation of the 4D-printed object at a particular temperature.

Schlagwörter

Stichwörter der Autor:innen

N-vinylcaprolactamcopolymershydrogellower critical solution temperaturephotopolymerisation

Autor:innen und Institutionen

  • Polymer, Recycling, Industrial, Sustainability and Manufacturing (PRISM) Center, Technological University of the Shannon: Midlands Midwest, Dublin Road, Athlone, N37 HD68 Co. Westmeath, Ireland.
  • CONFIRM Centre for Smart Manufacturing, University of Limerick, V94 C928 Co. Limerick, Ireland.
  • Centre for Industrial Service & Design, Technological University of the Shannon: Midlands Midwest, Dublin Road, Athlone, N37 HD68 Co. Westmeath, Ireland.
  • Applied Polymer Technologies Gateway, Material Research Institute, Technological University of the Shannon: Midlands Midwest, Dublin Road, Athlone, N37 HD68 Co. Westmeath, Ireland.

ORCID-Profile: Elaine Halligan, Shuo Zhuo, Mohamad Alsaadi, Billy Shu Hieng Tie, Gilberto S N Bezerra, Luke M Geever

Förderung

  • Advanced Materials and BioEngineering Research
  • SFI Centre for Advanced Materials and BioEngineering Research

Zitieren

APA

Halligan, E., Zhuo, S., Colbert, D. M., Alsaadi, M., Tie, B. S. H., Bezerra, G. S. N., Keane, G., & Geever, L. M. (2023). Modulation of the Lower Critical Solution Temperature of Thermoresponsive Poly(N-vinylcaprolactam) Utilizing Hydrophilic and Hydrophobic Monomers. Polymers, 15(7), 1595. https://doi.org/10.3390/polym15071595

Vancouver

Halligan E, Zhuo S, Colbert DM, Alsaadi M, Tie BSH, Bezerra GSN, et al. Modulation of the Lower Critical Solution Temperature of Thermoresponsive Poly(N-vinylcaprolactam) Utilizing Hydrophilic and Hydrophobic Monomers. Polymers. 2023;15(7):1595. doi:10.3390/polym15071595

BibTeX
@article{Halligan2023,
  author = {Halligan, Elaine and Zhuo, Shuo and Colbert, Declan Mary and Alsaadi, Mohamad and Tie, Billy Shu Hieng and Bezerra, Gilberto S N and Keane, Gavin and Geever, Luke M},
  title = {Modulation of the Lower Critical Solution Temperature of Thermoresponsive Poly(N-vinylcaprolactam) Utilizing Hydrophilic and Hydrophobic Monomers},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {7},
  pages = {1595},
  doi = {10.3390/polym15071595}
}
Kostenlos starten →