EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effects of Particle Size Distribution and Moisture Variation on Mechanical Strength of Biopolymer-Treated Soil

Hadi Fatehi iD, Dominic E L Ong iD, Jimmy Yu, Ilhan Chang iD

Polymers · 21.03.2023 · 15 (6) · 1549

DOI: 10.3390/polym15061549 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 21.03.2023. Verfasst von Hadi Fatehi und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering and Built Environment, Griffith University, Nathan, QLD 4111, Australia. Die Arbeit wurde bisher 51-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biopolymers have recently shown great potential to replace traditional binding materials in geotechnical engineering; however, more research is required to reach a deeper understanding of biopolymer-treated soil behavior. The objective of this study was to investigate the most important parameters that affect the behavior of biopolymer-treated soil, including biopolymer content, dehydration time, soil type effect, and durability. Sodium alginate and agar biopolymers were used due to their stability under severe conditions and the reasonable costs to study these parameters. A broad range of soil particle sizes was used to optimize the kaolinite-sand combination. As one of the main concerns in the behavior of biotreated soils, durability was investigated under five cycles of wetting and drying. In addition, a comprehensive microstructural study was performed by FTIR analysis and SEM images, as well as chemical interaction analysis. The results indicated that the optimized biopolymer content was in the range of 0.5–1% (to soil weight) and the dehydration time was 14 days. A soil combination of 25% kaolinite and 75% sand provided the highest compressive strength. Under wetting and drying conditions, biopolymers significantly increased soil resistance against strength reduction and soil mass loss. This study provides an understanding how agar and sodium alginate changes the behavior of the soil and can be used as a reference for further studies in the future.

Schlagwörter

Stichwörter der Autor:innen

agarbiopolymerbiopolymer-treated soildurability under wetting and dryingsodium alginate

Autor:innen und Institutionen

  • School of Engineering and Built Environment, Griffith University, Nathan, QLD 4111, Australia.
  • Cities Research Institute, Griffith University, Nathan, QLD 4111, Australia.
  • Department of Civil System Engineering, Ajou University, Suwon-si 16499, Republic of Korea.

ORCID-Profile: Hadi Fatehi, Dominic E L Ong, Ilhan Chang

Zitieren

APA

Fatehi, H., Ong, D. E. L., Yu, J., & Chang, I. (2023). The Effects of Particle Size Distribution and Moisture Variation on Mechanical Strength of Biopolymer-Treated Soil. Polymers, 15(6), 1549. https://doi.org/10.3390/polym15061549

Vancouver

Fatehi H, Ong DEL, Yu J, Chang I. The Effects of Particle Size Distribution and Moisture Variation on Mechanical Strength of Biopolymer-Treated Soil. Polymers. 2023;15(6):1549. doi:10.3390/polym15061549

BibTeX
@article{Fatehi2023,
  author = {Fatehi, Hadi and Ong, Dominic E L and Yu, Jimmy and Chang, Ilhan},
  title = {The Effects of Particle Size Distribution and Moisture Variation on Mechanical Strength of Biopolymer-Treated Soil},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {6},
  pages = {1549},
  doi = {10.3390/polym15061549}
}
Kostenlos starten →