EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Low Dielectric Constant Photocurable Fluorinated Poly (Phthalazinone Ether) Ink with Excellent Mechanical Properties and Heat Resistance

Guangsheng Zhang, Chenghao Wang, Lingmei Jiang, Yibo Wang, Bing Wang, Xiaoxu Wang, Haoran Liu, Lishuai Zong, Jinyan Wang iD, Xigao Jian

Polymers · 20.03.2023 · 15 (6) · 1531

DOI: 10.3390/polym15061531 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 20.03.2023. Verfasst von Guangsheng Zhang und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The photosensitive resins for 3D printing technology have been widely applied throughout the advanced communication field due to their merits of high molding accuracy and fast processing speed. Regardless, they, in particular, should have better mechanical properties, heat resistance, and dielectric properties. Herein, photocurable fluorinated poly (phthalazinone ether) (FSt-FPPE) was utilized as a prepolymer to improve the performance of photosensitive resin. A series of UV-curable inks named FST/DPGs were prepared with FSt-FPPE and acrylic diluents of different mass fractions. The FST/DPGs were cured into films by UV curing and post-treatment. After curing, their properties were characterized in detail. In terms of heat resistance, glass transition temperature (Tg) could reach 233 °C and the 5% thermal decomposition temperature (Td5%) was 371 °C. The tensile strength surprisingly reached 61.5 MPa, and the dielectric constant (Dk) could be significantly reduced to 2.75. Additionally, FST/DPGs were successfully employed in UV-assisted direct writing (DIW) to print 3D objects that benefited from their commendable fluidity and rapid curing speed. A stiff cylinder sample with a smooth surface and distinct pattern was ultimately obtained, indicating their remarkable 3D printing adaptation. Such photosensitive resin for UV-assisted DIW exhibits tremendous potential in the electronic industry.

Schlagwörter

Stichwörter der Autor:innen

dielectric constantheat resistancemechanical propertiesphotosensitive resin

Autor:innen und Institutionen

  • School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China.
  • State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116024, China.
  • Technology Innovation Center of High Performance Resin Materials, Dalian 116024, China.
  • School of Materials Science and Engineering, Dalian University of Technology, Dalian 116024, China.

ORCID-Profile: Jinyan Wang

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Zhang, G., Wang, C., Jiang, L., Wang, Y., Wang, B., Wang, X., Liu, H., Zong, L., Wang, J., & Jian, X. (2023). Low Dielectric Constant Photocurable Fluorinated Poly (Phthalazinone Ether) Ink with Excellent Mechanical Properties and Heat Resistance. Polymers, 15(6), 1531. https://doi.org/10.3390/polym15061531

Vancouver

Zhang G, Wang C, Jiang L, Wang Y, Wang B, Wang X, et al. Low Dielectric Constant Photocurable Fluorinated Poly (Phthalazinone Ether) Ink with Excellent Mechanical Properties and Heat Resistance. Polymers. 2023;15(6):1531. doi:10.3390/polym15061531

BibTeX
@article{Zhang2023,
  author = {Zhang, Guangsheng and Wang, Chenghao and Jiang, Lingmei and Wang, Yibo and Wang, Bing and Wang, Xiaoxu and Liu, Haoran and Zong, Lishuai and Wang, Jinyan and Jian, Xigao},
  title = {Low Dielectric Constant Photocurable Fluorinated Poly (Phthalazinone Ether) Ink with Excellent Mechanical Properties and Heat Resistance},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {6},
  pages = {1531},
  doi = {10.3390/polym15061531}
}
Kostenlos starten →