EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Medical-Grade Poly(Lactic Acid)/Hydroxyapatite Composite Films: Thermal and In Vitro Degradation Properties

Leonard Bauer iD, Anamarija Rogina iD, Marica Ivanković iD, Hrvoje Ivanković

Polymers · 18.03.2023 · 15 (6) · 1512

DOI: 10.3390/polym15061512 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 18.03.2023. Verfasst von Leonard Bauer und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Chemical Engineering and Technology, University of Zagreb, Trg Marka Marulića 19, HR-10001 Zagreb, Croatia. Die Arbeit wurde bisher 40-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Regional Development Fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Production of biocompatible composite scaffolds shifts towards additive manufacturing where thermoplastic biodegradable polymers such as poly(lactic acid) (PLA) are used as matrices. Differences between industrial- and medical-grade polymers are often overlooked although they may affect properties and degradation behaviour as significantly as the filler addition. In the present research, composite films based on medical-grade PLA and biogenic hydroxyapatite (HAp) with 0, 10, and 20 wt.% of HAp were prepared by solvent casting technique. The degradation of composites incubated in phosphate-buffered saline solution (PBS) at 37 °C after 10 weeks showed that the higher HAp content slowed down the hydrolytic PLA degradation and improved its thermal stability. Morphological nonuniformity after degradation was indicated by the different glass transition temperatures (Tg) throughout the film. The Tg of the inner part of the sample decreased significantly faster compared with the outer part. The decrease was observed prior to the weight loss of composite samples.

Schlagwörter

Stichwörter der Autor:innen

hydroxyapatitein vitro degradationmicrostructurepoly(lactic acid)

Autor:innen und Institutionen

  • Faculty of Chemical Engineering and Technology, University of Zagreb, Trg Marka Marulića 19, HR-10001 Zagreb, Croatia.

ORCID-Profile: Leonard Bauer, Anamarija Rogina, Marica Ivanković

Förderung

  • European Regional Development Fund

Zitieren

APA

Bauer, L., Rogina, A., Ivanković, M., & Ivanković, H. (2023). Medical-Grade Poly(Lactic Acid)/Hydroxyapatite Composite Films: Thermal and In Vitro Degradation Properties. Polymers, 15(6), 1512. https://doi.org/10.3390/polym15061512

Vancouver

Bauer L, Rogina A, Ivanković M, Ivanković H. Medical-Grade Poly(Lactic Acid)/Hydroxyapatite Composite Films: Thermal and In Vitro Degradation Properties. Polymers. 2023;15(6):1512. doi:10.3390/polym15061512

BibTeX
@article{Bauer2023,
  author = {Bauer, Leonard and Rogina, Anamarija and Ivanković, Marica and Ivanković, Hrvoje},
  title = {Medical-Grade Poly(Lactic Acid)/Hydroxyapatite Composite Films: Thermal and In Vitro Degradation Properties},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {6},
  pages = {1512},
  doi = {10.3390/polym15061512}
}
Kostenlos starten →