The Tribological and Mechanical Properties of PI/PAI/EP Polymer Coating under Oil Lubrication, Seawater Corrosion and Dry Sliding Wear
Polymers · 17.03.2023 · 15 (6) · 1507
DOI: 10.3390/polym15061507 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 17.03.2023. Verfasst von Shijie Yu und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering and Mechanics, Ningbo University, Ningbo 315211, China. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The National Nature Science Foundation of China, The Natural Science Foundation of Zhejiang Province, The Development fund of Zhejiang Key Laboratory of marine materials and protection technology/open Fund of the Key Laboratory of marine materials and applicati….
Abstract (Originalsprache)
To investigate the tribological performance of a copper alloy engine bearing under oil lubrication, seawater corrosion and dry sliding wear, three different PI/PAI/EP coatings consisting of 1.5 wt% Ce2O3, 2 wt% Ce2O3, 2.5 wt% Ce2O3 were designed, respectively. These designed coatings were prepared on the surface of CuPb22Sn2.5 copper alloy using a liquid spraying process. The tribological properties of these coatings under different working conditions were tested. The results show that the hardness of the coating decreases gradually with the addition of Ce2O3, and the agglomeration of Ce2O3 is the main reason for the decrease of hardness. The wear amount of the coating increases first and then decreases with the increase of Ce2O3 content under dry sliding wear. The wear mechanism is abrasive wear under the condition of seawater. The wear resistance of the coating decreases with the increase of Ce2O3 content. The wear resistance of the coating with 1.5 wt% Ce2O3 is the best under-seawater corrosion. Although Ce2O3 has corrosion resistance, the coating of 2.5 wt% Ce2O3 has the worst wear resistance under seawater conditions due to severe wear caused by agglomeration. Under oil lubrication conditions, the frictional coefficient of the coating is stable. The lubricating oil film has a good lubrication and protection effect.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering and Mechanics, Ningbo University, Ningbo 315211, China.
- School of Mechanical and Electrical Engineering, Wenzhou University, Wenzhou 325035, China.
- School of Materials, Southwest Jiaotong University, Chengdu 610031, China.
ORCID-Profile: Jun Cao
Förderung
- The National Nature Science Foundation of China
- The Natural Science Foundation of Zhejiang Province
- The Development fund of Zhejiang Key Laboratory of marine materials and protection technology/open Fund of the Key Laboratory of marine materials and applicati…
- The Ningbo key research and development program of unveiling and commanding
- The Hunan Science and Technology Innovation Project
- National Nature Science Foundation of China
- Natural Science Foundation of Zhejiang Province
- Development Fund of Zhejiang Key Laboratory of Marine Materials and Protection Technology/Open Fund of the Key Laboratory of Marine Materials and Application T…
Zitieren
APA
Yu, S., Cao, J., Li, S., Huang, H., & Li, X. (2023). The Tribological and Mechanical Properties of PI/PAI/EP Polymer Coating under Oil Lubrication, Seawater Corrosion and Dry Sliding Wear. Polymers, 15(6), 1507. https://doi.org/10.3390/polym15061507
Vancouver
Yu S, Cao J, Li S, Huang H, Li X. The Tribological and Mechanical Properties of PI/PAI/EP Polymer Coating under Oil Lubrication, Seawater Corrosion and Dry Sliding Wear. Polymers. 2023;15(6):1507. doi:10.3390/polym15061507
BibTeX
@article{Yu2023,
author = {Yu, Shijie and Cao, Jun and Li, Shuxin and Huang, Haibo and Li, Xiaojie},
title = {The Tribological and Mechanical Properties of PI/PAI/EP Polymer Coating under Oil Lubrication, Seawater Corrosion and Dry Sliding Wear},
journal = {Polymers},
year = {2023},
volume = {15},
number = {6},
pages = {1507},
doi = {10.3390/polym15061507}
}
EUVIMED