EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preventing the Collapse Behavior of Polyurethane Foams with the Addition of Cellulose Nanofiber

Sanghyeon Ju, Ajeong Lee iD, Youngeun Shin, Hyekyeong Jang, Jin-Woo Yi, Youngseok Oh, Nam-Ju Jo, Teahoon Park iD

Polymers · 17.03.2023 · 15 (6) · 1499

DOI: 10.3390/polym15061499 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 17.03.2023. Verfasst von Sanghyeon Ju und 7 weiteren Autor:innen. Beteiligte Einrichtung: Composites Research Division, Korea Institute of Materials Science (KIMS), 797, Changwon-Daero, Seongsan-Gu, Changwon-si 51508, Republic of Korea. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Korea Institute of Materials Science.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyurethane foam manufacturing depends on its materials and processes. A polyol that contains primary alcohol is very reactive with isocyanate. Sometimes, this may cause unexpected problems. In this study, a semi-rigid polyurethane foam was fabricated; however, its collapse occurred. The cellulose nanofiber was fabricated to solve this problem, and a weight ratio of 0.25, 0.5, 1, and 3% (based on total parts per weight of polyols) of the nanofiber was added to the polyurethane foams. The effect of the cellulose nanofiber on the polyurethane foams’ rheological, chemical, morphological, thermal, and anti-collapse performances was analyzed. The rheological analysis showed that 3 wt% of the cellulose nanofiber was unsuitable because of the aggregation of the filler. It was observed that the addition of the cellulose nanofiber showed the improved hydrogen bonding of the urethane linkage, even if it was not chemically reacted with the isocyanate groups. Moreover, due to the nucleating effect of the cellulose nanofiber, the average cell area of the produced foams decreased according to the amount of the cellulose nanofiber present, and the average cell area especially was reduced about five times when it contained 1 wt% more of the cellulose nanofiber than the neat foam. Although the thermal stability declined slightly, the glass transition temperature shifted from 25.8 °C to 37.6, 38.2, and 40.1 °C by when the cellulose nanofiber increased. Furthermore, the shrinkage ratio after 14 days from the foaming (%shrinkage) of the polyurethane foams decreased 15.4 times for the 1 wt% cellulose nanofiber polyurethane composite.

Schlagwörter

Stichwörter der Autor:innen

anti-collapsecellulose nanofiberhydrogen bondingnucleation agentpolyurethane foam

Autor:innen und Institutionen

  • Composites Research Division, Korea Institute of Materials Science (KIMS), 797, Changwon-Daero, Seongsan-Gu, Changwon-si 51508, Republic of Korea.
  • School of Chemical Engineering, Pusan National University, Busan 46241, Republic of Korea.

ORCID-Profile: Ajeong Lee, Teahoon Park

Förderung

  • National Research Foundation of Korea
  • Korea Institute of Materials Science

Zitieren

APA

Ju, S., Lee, A., Shin, Y., Jang, H., Yi, J. W., Oh, Y., Jo, N. J., & Park, T. (2023). Preventing the Collapse Behavior of Polyurethane Foams with the Addition of Cellulose Nanofiber. Polymers, 15(6), 1499. https://doi.org/10.3390/polym15061499

Vancouver

Ju S, Lee A, Shin Y, Jang H, Yi JW, Oh Y, et al. Preventing the Collapse Behavior of Polyurethane Foams with the Addition of Cellulose Nanofiber. Polymers. 2023;15(6):1499. doi:10.3390/polym15061499

BibTeX
@article{Ju2023,
  author = {Ju, Sanghyeon and Lee, Ajeong and Shin, Youngeun and Jang, Hyekyeong and Yi, Jin-Woo and Oh, Youngseok and Jo, Nam-Ju and Park, Teahoon},
  title = {Preventing the Collapse Behavior of Polyurethane Foams with the Addition of Cellulose Nanofiber},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {6},
  pages = {1499},
  doi = {10.3390/polym15061499}
}
Kostenlos starten →