EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Compression-Softening Bond Model for Non-Water Reactive Foaming Polyurethane Grouting Material

Boyuan Dong, Mingrui Du, Hongyuan Fang, Fuming Wang, Haoyue Zhang, Longhui Zhu

Polymers · 16.03.2023 · 15 (6) · 1493

DOI: 10.3390/polym15061493 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 16.03.2023. Verfasst von Boyuan Dong und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Water Conservancy and Civil Engineering, Zhengzhou University, Zhengzhou 450001, China. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, the National Natural Science Foundation of China, the Postdoctoral Research Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, the uniaxial compression and cyclic loading and unloading experiments were conducted on the non-water reactive foaming polyurethane (NRFP) grouting material with a density of 0.29 g/cm3, and the microstructure was characterized using scanning electron microscope (SEM) method. Based on the uniaxial compression and SEM characterization results and the elastic-brittle-plastic assumption, a compression softening bond (CSB) model describing the mechanical behavior of micro-foam walls under compression was proposed, and it was assigned to the particle units in a particle flow code (PFC) model simulating the NRFP sample. Results show that the NRFP grouting materials are porous mediums consisting of numerous micro-foams, and with the increasing density, the diameter of the micro-foams increases and the micro-foam walls become thicker. Under compression, the micro-foam walls crack, and the cracks are mainly perpendicular to the loading direction. The compressive stress–strain curve of the NRFP sample contains the linear increasing stage, yielding stage, yield plateau stage, and strain hardening stage, and the compressive strength and elastic modulus are 5.72 MPa and 83.2 MPa, respectively. Under the cyclic loading and unloading, when the number of cycles increases, the residual strain increases, and there is little difference between the modulus during the loading and unloading processes. The stress–strain curves of the PFC model under uniaxial compression and cyclic loading and unloading are consistent with the experimental ones, well indicating the feasibility of using the CSB model and PFC simulation method to study the mechanical properties of NRFP grouting materials. The failure of the contact elements in the simulation model causes the yielding of the sample. The yield deformation propagates almost perpendicular to the loading direction and is distributed in the material layer by layer, which ultimately results in the bulging deformation of the sample. This paper provides a new insight into the application of the discrete element numerical method in NRFP grouting materials.

Schlagwörter

Stichwörter der Autor:innen

discrete elementelastic-brittle-plastic assumptionmicro-foamsnon-water reactive foaming polyurethane grouting material

Autor:innen und Institutionen

  • School of Water Conservancy and Civil Engineering, Zhengzhou University, Zhengzhou 450001, China.
  • National Local Joint Engineering Laboratory of Major Infrastructure Testing and Rehabilitation Technology, Zhengzhou 450001, China.
  • Collaborative Innovation Center of Water Conservancy and Transportation Infrastructure Safety, Zhengzhou 450001, China.
  • Yellow River Laboratory, Zhengzhou University, Zhengzhou 450001, China.
  • Shenzhen Feiyang Protech Corp., Ltd., Shenzhen 518000, China.

Förderung

  • National Key Research and Development Program of China
  • the National Natural Science Foundation of China
  • the Postdoctoral Research Foundation of China
  • the Program for Science and Technology Innovation Talents in Universities of Henan Province
  • the Program for Guangdong Introducing Innovative and Enterpreneurial Teams
  • National Natural Science Foundation of China
  • Postdoctoral Research Foundation of China
  • Program for Science and Technology Innovation Talents in Universities of Henan Province

Zitieren

APA

Dong, B., Du, M., Fang, H., Wang, F., Zhang, H., & Zhu, L. (2023). Compression-Softening Bond Model for Non-Water Reactive Foaming Polyurethane Grouting Material. Polymers, 15(6), 1493. https://doi.org/10.3390/polym15061493

Vancouver

Dong B, Du M, Fang H, Wang F, Zhang H, Zhu L. Compression-Softening Bond Model for Non-Water Reactive Foaming Polyurethane Grouting Material. Polymers. 2023;15(6):1493. doi:10.3390/polym15061493

BibTeX
@article{Dong2023,
  author = {Dong, Boyuan and Du, Mingrui and Fang, Hongyuan and Wang, Fuming and Zhang, Haoyue and Zhu, Longhui},
  title = {Compression-Softening Bond Model for Non-Water Reactive Foaming Polyurethane Grouting Material},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {6},
  pages = {1493},
  doi = {10.3390/polym15061493}
}
Kostenlos starten →