Electrochemically Stable Rechargeable Lithium–Sulfur Batteries Equipped with an Electrospun Polyacrylonitrile Nanofiber Film
Polymers · 15.03.2023 · 15 (6) · 1460
DOI: 10.3390/polym15061460 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 15.03.2023. Verfasst von Li-Ling Chiu und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, National Cheng Kung University, No. 1, University Road, Tainan City 70101, Taiwan. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Education, National Science and Technology Council, Ministry of Education (MOE) in Taiwan under Yushan Young Scholar Program and the National Science and Technology Council (NSTC).
Abstract (Originalsprache)
The high theoretical charge-storage capacity and energy density of lithium–sulfur batteries make them a promising next-generation energy-storage system. However, liquid polysulfides are highly soluble in the electrolytes used in lithium–sulfur batteries, which results in irreversible loss of their active materials and rapid capacity degradation. In this study, we adopt the widely applied electrospinning method to fabricate an electrospun polyacrylonitrile film containing non-nanoporous fibers bearing continuous electrolyte tunnels and demonstrate that this serves as an effective separator in lithium–sulfur batteries. This polyacrylonitrile film exhibits high mechanical strength and supports a stable lithium stripping and plating reaction that persists for 1000 h, thereby protecting a lithium-metal electrode. The polyacrylonitrile film also enables a polysulfide cathode to attain high sulfur loadings (4–16 mg cm−2) and superior performance from C/20 to 1C with a long cycle life (200 cycles). The high reaction capability and stability of the polysulfide cathode result from the high polysulfide retention and smooth lithium-ion diffusion of the polyacrylonitrile film, which endows the lithium–sulfur cells with high areal capacities (7.0–8.6 mA·h cm−2) and energy densities (14.7–18.1 mW·h cm−2).
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials Science and Engineering, National Cheng Kung University, No. 1, University Road, Tainan City 70101, Taiwan.
- Hierarchical Green-Energy Materials Research Center, National Cheng Kung University, No. 1, University Road, Tainan City 70101, Taiwan.
ORCID-Profile: Sheng-Heng Chung
Förderung
- Ministry of Education
- National Science and Technology Council
- Ministry of Education (MOE) in Taiwan under Yushan Young Scholar Program and the National Science and Technology Council (NSTC)
Zitieren
APA
Chiu, L. L., & Chung, S. H. (2023). Electrochemically Stable Rechargeable Lithium–Sulfur Batteries Equipped with an Electrospun Polyacrylonitrile Nanofiber Film. Polymers, 15(6), 1460. https://doi.org/10.3390/polym15061460
Vancouver
Chiu LL, Chung SH. Electrochemically Stable Rechargeable Lithium–Sulfur Batteries Equipped with an Electrospun Polyacrylonitrile Nanofiber Film. Polymers. 2023;15(6):1460. doi:10.3390/polym15061460
BibTeX
@article{Chiu2023,
author = {Chiu, Li-Ling and Chung, Sheng-Heng},
title = {Electrochemically Stable Rechargeable Lithium–Sulfur Batteries Equipped with an Electrospun Polyacrylonitrile Nanofiber Film},
journal = {Polymers},
year = {2023},
volume = {15},
number = {6},
pages = {1460},
doi = {10.3390/polym15061460}
}
EUVIMED