EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Describing and Modeling Rough Composites Surfaces by Using Topological Data Analysis and Fractional Brownian Motion

Antoine Runacher iD, Mohammad-Javad Kazemzadeh-Parsi iD, Daniele Di Lorenzo, Victor Champaney, Nicolas Hascoet, Amine Ammar iD, Francisco Chinesta

Polymers · 14.03.2023 · 15 (6) · 1449

DOI: 10.3390/polym15061449 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 14.03.2023. Verfasst von Antoine Runacher und 6 weiteren Autor:innen. Beteiligte Einrichtung: PIMM Laboratory and ESI Group Chair, Arts et Metiers Institute of Technology, 151 Boulevard de Hopital, 75013 Paris, France. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union Horizon 2020 research and innovation programme.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Many composite manufacturing processes employ the consolidation of pre-impregnated preforms. However, in order to obtain adequate performance of the formed part, intimate contact and molecular diffusion across the different composites’ preform layers must be ensured. The latter takes place as soon as the intimate contact occurs and the temperature remains high enough during the molecular reptation characteristic time. The former, in turn, depends on the applied compression force, the temperature and the composite rheology, which, during the processing, induce the flow of asperities, promoting the intimate contact. Thus, the initial roughness and its evolution during the process, become critical factors in the composite consolidation. Processing optimization and control are needed for an adequate model, enabling it to infer the consolidation degree from the material and process features. The parameters associated with the process are easily identifiable and measurable (e.g., temperature, compression force, process time, ⋯). The ones concerning the materials are also accessible; however, describing the surface roughness remains an issue. Usual statistical descriptors are too poor and, moreover, they are too far from the involved physics. The present paper focuses on the use of advanced descriptors out-performing usual statistical descriptors, in particular those based on the use of homology persistence (at the heart of the so-called topological data analysis—TDA), and their connection with fractional Brownian surfaces. The latter constitutes a performance surface generator able to represent the surface evolution all along the consolidation process, as the present paper emphasizes.

Schlagwörter

Stichwörter der Autor:innen

composite consolidationfractional Brownian surfacesrough surfacestopological data analysis—TDA

Autor:innen und Institutionen

  • PIMM Laboratory and ESI Group Chair, Arts et Metiers Institute of Technology, 151 Boulevard de Hopital, 75013 Paris, France.
  • IPC, 2 Rue Pierre et Marie Curie, 01100 Bellignat, France.
  • LAMPA Laboratory and ESI Group Chair, Arts et Metiers Institute of Technology, 2 bd du Ronceray, 49035 Angers, France.
  • ESI Group, 3 Rue Saarinen, 94150 Rungis, France.

ORCID-Profile: Antoine Runacher, Mohammad-Javad Kazemzadeh-Parsi, Amine Ammar

Förderung

  • European Union Horizon 2020 research and innovation programme

Zitieren

APA

Runacher, A., Kazemzadeh-Parsi, M. J., Di Lorenzo, D., Champaney, V., Hascoet, N., Ammar, A., & Chinesta, F. (2023). Describing and Modeling Rough Composites Surfaces by Using Topological Data Analysis and Fractional Brownian Motion. Polymers, 15(6), 1449. https://doi.org/10.3390/polym15061449

Vancouver

Runacher A, Kazemzadeh-Parsi MJ, Di Lorenzo D, Champaney V, Hascoet N, Ammar A, et al. Describing and Modeling Rough Composites Surfaces by Using Topological Data Analysis and Fractional Brownian Motion. Polymers. 2023;15(6):1449. doi:10.3390/polym15061449

BibTeX
@article{Runacher2023,
  author = {Runacher, Antoine and Kazemzadeh-Parsi, Mohammad-Javad and Di Lorenzo, Daniele and Champaney, Victor and Hascoet, Nicolas and Ammar, Amine and Chinesta, Francisco},
  title = {Describing and Modeling Rough Composites Surfaces by Using Topological Data Analysis and Fractional Brownian Motion},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {6},
  pages = {1449},
  doi = {10.3390/polym15061449}
}
Kostenlos starten →