EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Epoxy-Modified Bismaleimide Structural Adhesive Film Toughened Synergistically with PEK-C and Core–Shell Polymers for Bonding CFRP

Liwei Zhao iD, Xin Xu, Wanbao Xiao, Hongfeng Li, Hao Feng, Changwei Liu, Yingjie Qiao, Xuefeng Bai, Dezhi Wang, Chunyan Qu

Polymers · 14.03.2023 · 15 (6) · 1436

DOI: 10.3390/polym15061436 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 14.03.2023. Verfasst von Liwei Zhao und 9 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Petrochemistry, Heilongjiang Academy of Sciences, Harbin 150040, China. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key R&D Program of Heilongjiang Province, Science Foundation for Distinguished Young Scholars of the Heilongjiang Academy of Sciences, China Postdoctoral Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bismaleimide (BMI) resin-based structural adhesives have excellent heat resistance, with important applications demonstrated in the bonding of high-temperature BMI composites. In this paper, we report an epoxy-modified BMI structural adhesive with excellent properties for bonding BMI-based CFRP. We prepared the BMI adhesive using epoxy-modified BMI as the matrix and PEK-C and core–shell polymers as synergistic tougheners. We found that the epoxy resins improve the process and bonding properties of BMI resin but slightly reduce thermal stability. PEK-C and core–shell polymers synergistically improve the toughness and bonding performances of the modified BMI adhesive system and allow the maintenance of heat resistance. The optimized BMI adhesive exhibits excellent heat resistance, with a high glass transition temperature of 208.6 °C and a high thermal degradation temperature of 425.4 °C. Most importantly, the optimized BMI adhesive exhibits satisfactory intrinsic bonding and thermal stability. It has a high shear strength of 32.0 MPa at room temperature and up to 17.9 MPa at 200 °C. The BMI adhesive-bonded composite joint has a high shear strength of 38.6 and 17.3 MPa at room temperature and 200 °C, respectively, indicating effective bonding and excellent heat resistance.

Schlagwörter

Stichwörter der Autor:innen

bismaleimide adhesivebonding performancecomposite jointfailure modesynergistic toughening

Autor:innen und Institutionen

  • Institute of Petrochemistry, Heilongjiang Academy of Sciences, Harbin 150040, China.
  • College of Material Science and Chemical Engineering, Harbin Engineering University, Harbin 150001, China.

ORCID-Profile: Liwei Zhao

Förderung

  • Key R&D Program of Heilongjiang Province
  • Science Foundation for Distinguished Young Scholars of the Heilongjiang Academy of Sciences
  • China Postdoctoral Science Foundation
  • Postdoctoral Science Foundation of Heilongjiang Province of China
  • Fundamental Research Funds of the Heilongjiang Provincial Institutes
  • Key R&D Program of Heilongjiang Province

Zitieren

APA

Zhao, L., Xu, X., Xiao, W., Li, H., Feng, H., Liu, C., Qiao, Y., Bai, X., Wang, D., & Qu, C. (2023). Epoxy-Modified Bismaleimide Structural Adhesive Film Toughened Synergistically with PEK-C and Core–Shell Polymers for Bonding CFRP. Polymers, 15(6), 1436. https://doi.org/10.3390/polym15061436

Vancouver

Zhao L, Xu X, Xiao W, Li H, Feng H, Liu C, et al. Epoxy-Modified Bismaleimide Structural Adhesive Film Toughened Synergistically with PEK-C and Core–Shell Polymers for Bonding CFRP. Polymers. 2023;15(6):1436. doi:10.3390/polym15061436

BibTeX
@article{Zhao2023,
  author = {Zhao, Liwei and Xu, Xin and Xiao, Wanbao and Li, Hongfeng and Feng, Hao and Liu, Changwei and Qiao, Yingjie and Bai, Xuefeng and Wang, Dezhi and Qu, Chunyan},
  title = {Epoxy-Modified Bismaleimide Structural Adhesive Film Toughened Synergistically with PEK-C and Core–Shell Polymers for Bonding CFRP},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {6},
  pages = {1436},
  doi = {10.3390/polym15061436}
}
Kostenlos starten →