Characterization and Process Optimization for Enhanced Production of Polyhydroxybutyrate (PHB)-Based Biodegradable Polymer from Bacillus flexus Isolated from Municipal Solid Waste Landfill Site
Polymers · 12.03.2023 · 15 (6) · 1407
DOI: 10.3390/polym15061407 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 12.03.2023. Verfasst von Mohd Adnan und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biology, College of Science, University of Ha'il, Ha'il P.O. Box 2440, Saudi Arabia. Die Arbeit wurde bisher 44-mal zitiert (Crossref) und nennt 92 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Hail, Scientific Research Deanship at University of Ha’il-Saudi Arabia.
Abstract (Originalsprache)
In recent years, there has been a growing interest in bio-based degradable plastics as an alternative to synthetic plastic. Polyhyroxybutyrate (PHB) is a macromolecule produced by bacteria as a part of their metabolism. Bacteria accumulate them as reserve materials when growing under different stress conditions. PHBs can be selected as alternatives for the production of biodegradable plastics because of their fast degradation properties when exposed to natural environmental conditions. Hence, the present study was undertaken in order to isolate the potential PHB-producing bacteria isolated from the municipal solid waste landfill site soil samples collected from the Ha’il region of Saudi Arabia to assess the production of PHB using agro-residues as a carbon source and to evaluate the growth of PHB production. In order to screen the isolates for producing PHB, a dye-based procedure was initially employed. Based on the 16S rRNA analysis of the isolates, Bacillus flexus (B. flexus) accumulated the highest amount of PHB of all the isolates. By using a UV–Vis spectrophotometer and Fourier-transform infrared spectrophotometer (FT-IR), in which a sharp absorption band at 1721.93 cm−1 (C=O stretching of ester), 1273.23 cm−1 (–CH group), multiple bands between 1000 and 1300 cm−1 (stretching of the C–O bond), 2939.53 cm−1 (–CH3 stretching), 2880.39 cm−1 (–CH2 stretching) and 3510.02 cm−1 (terminal –OH group), the extracted polymer was characterized and confirmed its structure as PHB. The highest PHB production by B. flexus was obtained after 48 h of incubation (3.9 g/L) at pH 7.0 (3.7 g/L), 35 °C (3.5 g/L) with glucose (4.1 g/L) and peptone (3.4 g/L) as carbon and nitrogen sources, respectively. As a result of the use of various cheap agricultural wastes, such as rice bran, barley bran, wheat bran, orange peel and banana peel as carbon sources, the strain was found to be capable of accumulating PHB. Using response surface methodology (RSM) for optimization of PHB synthesis using a Box–Behnken design (BBD) proved to be highly effective in increasing the polymer yield of the synthesis. With the optimum conditions obtained from RSM, PHB content can be increased by approximately 1.3-fold when compared to an unoptimized medium, resulting in a significant reduction in production costs. Thus, isolate B. flexus is a highly promising candidate for the production of industrial-size quantities of PHB from agricultural wastes and is capable of removing the environmental concerns associated with synthetic plastics from the industrial production process. Moreover, the successful production of bioplastics using a microbial culture provides a promising avenue for the large-scale production of biodegradable and renewable plastics with potential applications in various industries, including packaging, agriculture and medicine.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Biology, College of Science, University of Ha'il, Ha'il P.O. Box 2440, Saudi Arabia.
- Department of Clinical Nutrition, College of Applied Medical Sciences, University of Ha'il, Ha'il P.O. Box 2440, Saudi Arabia.
- Department of Pharmaceutical Chemistry and Pharmacognosy, College of Pharmacy, Jazan University, P.O. Box 114, Jazan 45142, Saudi Arabia.
- Department of Oral Radiology, College of Dentistry, University of Ha'il, Ha'il PO Box 2440, Saudi Arabia.
- Department of Biotechnology, Parul Institute of Applied Sciences and Centre of Research for Development, Parul University, Vadodara 391760, India.
ORCID-Profile: Mohd Adnan, Arif Jamal Siddiqui, Syed Amir Ashraf, Mejdi Snoussi, Riadh Badraoui, Angum M M Ibrahim, Mitesh Patel
Förderung
- University of Hail
- Scientific Research Deanship at University of Ha’il-Saudi Arabia
Zitieren
APA
Adnan, M., Siddiqui, A. J., Ashraf, S. A., Snoussi, M., Badraoui, R., Ibrahim, A. M. M., Alreshidi, M., Sachidanandan, M., & Patel, M. (2023). Characterization and Process Optimization for Enhanced Production of Polyhydroxybutyrate (PHB)-Based Biodegradable Polymer from Bacillus flexus Isolated from Municipal Solid Waste Landfill Site. Polymers, 15(6), 1407. https://doi.org/10.3390/polym15061407
Vancouver
Adnan M, Siddiqui AJ, Ashraf SA, Snoussi M, Badraoui R, Ibrahim AMM, et al. Characterization and Process Optimization for Enhanced Production of Polyhydroxybutyrate (PHB)-Based Biodegradable Polymer from Bacillus flexus Isolated from Municipal Solid Waste Landfill Site. Polymers. 2023;15(6):1407. doi:10.3390/polym15061407
BibTeX
@article{Adnan2023,
author = {Adnan, Mohd and Siddiqui, Arif Jamal and Ashraf, Syed Amir and Snoussi, Mejdi and Badraoui, Riadh and Ibrahim, Angum M M and Alreshidi, Mousa and Sachidanandan, Manojkumar and Patel, Mitesh},
title = {Characterization and Process Optimization for Enhanced Production of Polyhydroxybutyrate (PHB)-Based Biodegradable Polymer from Bacillus flexus Isolated from Municipal Solid Waste Landfill Site},
journal = {Polymers},
year = {2023},
volume = {15},
number = {6},
pages = {1407},
doi = {10.3390/polym15061407}
}
EUVIMED