EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Novel Framework for Qualification of a Composite-Based Main Landing Gear Strut of a Lightweight Aircraft

Muhammad Ayaz Ahmad iD, Syed Irtiza Ali Shah, Sabih Ahmad Khan iD, Haris Ali Khan, Taimur Ali Shams iD

Polymers · 11.03.2023 · 15 (6) · 1402

DOI: 10.3390/polym15061402 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 11.03.2023. Verfasst von Muhammad Ayaz Ahmad und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Aerospace Engineering, College of Aeronautical Engineering, National University of Sciences and Technology, Islamabad 44000, Pakistan. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Higher Education Commission, Higher Education Commission (HEC) of Pakistan, National University of Sciences and Technology, Islamabad, Pakistan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The determination of suitable testing and qualification procedures for fiber-reinforced polymer matrix composite structures is an active area of research due to the increased demand, especially in the field of aerospace. This research illustrates the development of a generic qualification framework for a composite-based main landing gear strut of a lightweight aircraft. For this purpose, a landing gear strut composed of T700 carbon fiber/epoxy material was designed and analyzed for a given lightweight aircraft having mass of 1600 kg. Computational analysis was performed on ABAQUS CAE® to evaluate the maximum stresses and critical failure modes encountered during one-point landing condition as defined in the UAV Systems Airworthiness Requirements (USAR) and Air Worthiness Standards FAA FAR Part 23. A three-step qualification framework including material, process and product-based qualification was then proposed against these maximum stresses and failure modes. The proposed framework revolves around the destructive testing of specimens initially as per ASTM standards D 7264 and D 2344, followed by defining the autoclave process parameters and customized testing of thick specimens to evaluate material strength against the maximum stresses in specific failure modes of the main landing gear strut. Once the desired strength of the specimens was achieved based on material and process qualifications, qualification criteria for the main landing gear strut were proposed which would not only serve as an alternative to drop test the landing gear struts as defined in air worthiness standards during mass production, but would also give confidence to manufacturers to undertake the manufacturing of main landing gear struts using qualified material and process parameters.

Schlagwörter

Stichwörter der Autor:innen

CFRP manufacturingcomposite landing geardesign and analysisdrop testqualification frameworktesting and qualification methodology

Autor:innen und Institutionen

  • Department of Aerospace Engineering, College of Aeronautical Engineering, National University of Sciences and Technology, Islamabad 44000, Pakistan.

ORCID-Profile: Muhammad Ayaz Ahmad, Sabih Ahmad Khan, Taimur Ali Shams

Förderung

  • Higher Education Commission
  • Higher Education Commission (HEC) of Pakistan
  • National University of Sciences and Technology, Islamabad, Pakistan

Zitieren

APA

Ahmad, M. A., Ali Shah, S. I., Khan, S. A., Khan, H. A., & Shams, T. A. (2023). A Novel Framework for Qualification of a Composite-Based Main Landing Gear Strut of a Lightweight Aircraft. Polymers, 15(6), 1402. https://doi.org/10.3390/polym15061402

Vancouver

Ahmad MA, Ali Shah SI, Khan SA, Khan HA, Shams TA. A Novel Framework for Qualification of a Composite-Based Main Landing Gear Strut of a Lightweight Aircraft. Polymers. 2023;15(6):1402. doi:10.3390/polym15061402

BibTeX
@article{Ahmad2023,
  author = {Ahmad, Muhammad Ayaz and Ali Shah, Syed Irtiza and Khan, Sabih Ahmad and Khan, Haris Ali and Shams, Taimur Ali},
  title = {A Novel Framework for Qualification of a Composite-Based Main Landing Gear Strut of a Lightweight Aircraft},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {6},
  pages = {1402},
  doi = {10.3390/polym15061402}
}
Kostenlos starten →