EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Crazing Initiation and Growth in Polymethyl Methacrylate under Effects of Alcohol and Stress

Ying Yan iD, Yujia Sun, Jiyang Su, Bo Li, Ping Zhou iD

Polymers · 09.03.2023 · 15 (6) · 1375

DOI: 10.3390/polym15061375 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 09.03.2023. Verfasst von Ying Yan und 4 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of High-Performance Precision Manufacturing, Department of Mechanical Engineering, Dalian University of Technology, Dalian 11602…. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer crazing is typically a precursor to damage and considerably reduces the mechanical performance of polymer materials. The concentrated stress caused by machines and the solvent atmosphere created during machining exacerbates the formation of crazing. In this study, the tensile test method was employed to examine the initiation and progression of crazing. The research focused on polymethyl methacrylate (PMMA), both regular and oriented, and the impact of machining and alcohol solvents on the formation of crazing. The results showed that the alcohol solvent influenced PMMA through physical diffusion, whereas machining primarily affected crazing growth via residual stress. Treatment reduced the crazing stress threshold of PMMA from 20% to 35% and produced a threefold increase in its sensitivity to stress. The findings revealed that oriented PMMA exhibited 20 MPa higher resistance to crazing stress compared with regular PMMA. The results also indicated that the extension of the crazing tip and thickening were in conflict, with the crazing tip of regular PMMA severely bending under tensile stress. This study provides valuable insight into the initiation of crazing and the methods of its prevention.

Schlagwörter

Stichwörter der Autor:innen

crazingplastic deformationswellingtensile test

Autor:innen und Institutionen

  • State Key Laboratory of High-Performance Precision Manufacturing, Department of Mechanical Engineering, Dalian University of Technology, Dalian 116024, China.

ORCID-Profile: Ying Yan, Ping Zhou

Förderung

  • National Natural Science Foundation of China
  • National Key Research and Development Program of China

Zitieren

APA

Yan, Y., Sun, Y., Su, J., Li, B., & Zhou, P. (2023). Crazing Initiation and Growth in Polymethyl Methacrylate under Effects of Alcohol and Stress. Polymers, 15(6), 1375. https://doi.org/10.3390/polym15061375

Vancouver

Yan Y, Sun Y, Su J, Li B, Zhou P. Crazing Initiation and Growth in Polymethyl Methacrylate under Effects of Alcohol and Stress. Polymers. 2023;15(6):1375. doi:10.3390/polym15061375

BibTeX
@article{Yan2023,
  author = {Yan, Ying and Sun, Yujia and Su, Jiyang and Li, Bo and Zhou, Ping},
  title = {Crazing Initiation and Growth in Polymethyl Methacrylate under Effects of Alcohol and Stress},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {6},
  pages = {1375},
  doi = {10.3390/polym15061375}
}
Kostenlos starten →