EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Thermal and Electrical Characterization of Polyester Resins Suitable for Electric Motor Insulation

Elisa Calabrese iD, Marialuigia Raimondo iD, Michelina Catauro iD, Luigi Vertuccio, Patrizia Lamberti iD, Raffaele Raimo, Vincenzo Tucci iD, Liberata Guadagno iD

Polymers · 09.03.2023 · 15 (6) · 1374

DOI: 10.3390/polym15061374 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 09.03.2023. Verfasst von Elisa Calabrese und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, 132, 84084 Fisciano, Italy. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper undertakes the thermal and electrical characterization of three commercial unsaturated polyester imide resins (UPIR) to identify which among them could better perform the insulation function of electric motors (high-power induction motors fed by pulse-wide modulation (PWM) inverters). The process foreseen for the motor insulation using these resins is Vacuum Pressure Impregnation (VPI). The resin formulations were specially selected because they are one-component systems; hence, before the VPI process, they do not require mixing steps with external hardeners to activate the curing process. Furthermore, they are characterized by low viscosity and a thermal class higher than 180 °C and are Volatile Organic Compound (VOC)-free. Thermal investigations using Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) techniques prove their excellent thermal resistance up to 320 °C. Moreover, impedance spectroscopy in the frequency range of 100 Hz–1 MHz was analyzed to compare the electromagnetic performance of the considered formulations. They manifest an electrical conductivity starting from 10−10 S/m, a relative permittivity around 3, and a loss tangent value lower than 0.02, which appears almost stable in the analyzed frequency range. These values confirm their usefulness as impregnating resins in secondary insulation material applications.

Schlagwörter

Stichwörter der Autor:innen

PWM-fed motorsVacuum Pressure Impregnation (VPI)insulating materialspolyester resinsthermal analyses

Autor:innen und Institutionen

  • Department of Industrial Engineering, University of Salerno, Via Giovanni Paolo II, 132, 84084 Fisciano, Italy.
  • Department of Engineering, University of Campania "Luigi Vanvitelli", Via Roma 29, 81031 Aversa, Italy.
  • Department of Information and Electrical Engineering and Applied Mathematics, University of Salerno, Via Giovanni Paolo II, 132, 84084 Fisciano, Italy.

ORCID-Profile: Elisa Calabrese, Marialuigia Raimondo, Michelina Catauro, Patrizia Lamberti, Vincenzo Tucci, Liberata Guadagno

Zitieren

APA

Calabrese, E., Raimondo, M., Catauro, M., Vertuccio, L., Lamberti, P., Raimo, R., Tucci, V., & Guadagno, L. (2023). Thermal and Electrical Characterization of Polyester Resins Suitable for Electric Motor Insulation. Polymers, 15(6), 1374. https://doi.org/10.3390/polym15061374

Vancouver

Calabrese E, Raimondo M, Catauro M, Vertuccio L, Lamberti P, Raimo R, et al. Thermal and Electrical Characterization of Polyester Resins Suitable for Electric Motor Insulation. Polymers. 2023;15(6):1374. doi:10.3390/polym15061374

BibTeX
@article{Calabrese2023,
  author = {Calabrese, Elisa and Raimondo, Marialuigia and Catauro, Michelina and Vertuccio, Luigi and Lamberti, Patrizia and Raimo, Raffaele and Tucci, Vincenzo and Guadagno, Liberata},
  title = {Thermal and Electrical Characterization of Polyester Resins Suitable for Electric Motor Insulation},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {6},
  pages = {1374},
  doi = {10.3390/polym15061374}
}
Kostenlos starten →