EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Recycling of Heterogeneous Mixed Waste Polymers through Reactive Mixing

Vincenzo Titone iD, Emmanuel Fortunato Gulino iD, Francesco Paolo La Mantia iD

Polymers · 09.03.2023 · 15 (6) · 1367

DOI: 10.3390/polym15061367 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 09.03.2023. Verfasst von Vincenzo Titone und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering, University of Palermo, Viale delle Scienze, 90128 Palermo, Italy. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Anything that is not recycled and/or recovered from waste represents a loss of raw materials. Recycling plastics can help to reduce this loss and to reduce greenhouse gases, improving the goal of the decarbonization of plastic. While the recycling of single polymers is well assessed, the recycling of mixed plastics is very difficult because of the strong incompatibility among the different polymers usually present in urban waste. In this work, heterogeneous mixed polymers, i.e., polyethylene (PE), polypropylene (PP), polystyrene (PS) and polyethylenetherephthalate (PET) were processed using a laboratory mixer under different conditions of temperature, rotational speed and time to evaluate the effect of the above parameters on morphology, viscosity and mechanical properties of the final blends. Morphological analysis shows a strong incompatibility between the polyethylene matrix and the other dispersed polymers. The blends show, of course, a brittle behavior, but this behavior slightly improves with decreasing temperature and increasing rotational speed. A brittle-ductile transition was observed only at a high level of mechanical stress obtained by increasing rotational speed and decreasing temperature and processing time. This behavior has been attributed to both a decrease in the dimensions of the particles of the dispersed phase and to the formation of a small amount of copolymers that act as adhesion promoters between matrix and dispersed phases.

Schlagwörter

Stichwörter der Autor:innen

heterogeneous blendmechanical propertiespolyolefinrecyclingrheology

Autor:innen und Institutionen

  • Department of Engineering, University of Palermo, Viale delle Scienze, 90128 Palermo, Italy.
  • INSTM, Consortium for Materials Science and Technology, Via Giusti 9, 50125 Florence, Italy.

ORCID-Profile: Vincenzo Titone, Emmanuel Fortunato Gulino, Francesco Paolo La Mantia

Zitieren

APA

Titone, V., Gulino, E. F., & La Mantia, F. P. (2023). Recycling of Heterogeneous Mixed Waste Polymers through Reactive Mixing. Polymers, 15(6), 1367. https://doi.org/10.3390/polym15061367

Vancouver

Titone V, Gulino EF, La Mantia FP. Recycling of Heterogeneous Mixed Waste Polymers through Reactive Mixing. Polymers. 2023;15(6):1367. doi:10.3390/polym15061367

BibTeX
@article{Titone2023,
  author = {Titone, Vincenzo and Gulino, Emmanuel Fortunato and La Mantia, Francesco Paolo},
  title = {Recycling of Heterogeneous Mixed Waste Polymers through Reactive Mixing},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {6},
  pages = {1367},
  doi = {10.3390/polym15061367}
}
Kostenlos starten →