EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In Vitro Color Stability Evaluation of Three Polished and Unpolished Nanohybrid Resin Composites Immersed in a 0.12% Chlorhexidine-Based Mouthwash at Different Times

Reyna Allccahuaman-Avalos, Ramín Medina-Sánchez, Leonor Castro-Ramirez iD, Marysela Ladera-Castañeda, Luis Cervantes-Ganoza iD, Reynaldo Martínez-Campos iD, Fredy Solís-Dante, Ana Aliaga-Mariñas, Arturo Verástegui-Sandoval, César Cayo-Rojas iD

Polymers · 07.03.2023 · 15 (6) · 1339

DOI: 10.3390/polym15061339 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 07.03.2023. Verfasst von Reyna Allccahuaman-Avalos und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of Stomatology, Universidad Privada San Juan Bautista, Lima 15067, Peru. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The use of chlorhexidine-based mouthwashes on resin composites with rough surfaces can cause discoloration which compromises the esthetic of patients. The present study aimed to evaluate the in vitro color stability of Forma (Ultradent Products, Inc., South Jordan), Tetric N-Ceram (Ivoclar Vivadent, Schaan, Liechtenstein) and Filtek Z350XT (3M, ESPE, St. Paul, MN, USA) resin composites, with and without polishing, after being immersed in a 0.12% chlorhexidine (CHX)-based mouthwash at different times. The present in vitro experimental and longitudinal study used 96 nanohybrid resin composite blocks (Forma, Tetric N-Ceram and Filtek Z350XT) 8 mm in diameter and 2 mm thick, evenly distributed. Each resin composite group was divided into two subgroups (n = 16) with and without polishing and then immersed in a 0.12% CHX-based mouthwash for 7, 14, 21 and 28 days. Color measurements were performed with a calibrated digital spectrophotometer. Nonparametric tests were used to compare independent (Mann–Whitney U and Kruskal–Wallis) and related (Friedman) measures. In addition, the Bonferroni post hoc correction was used considering a significance level of p < 0.05. All polished and unpolished resin composites presented color variation < 3.3 when immersed for up to 14 days in 0.12% CHX-based mouthwash. The polished resin composite with the lowest color variation (ΔE) values over time was Forma, and the one with the highest values was Tetric N-Ceram. When comparing the color variation (ΔE) over time, it was observed that the three resin composites, with and without polishing, presented a significant change (p < 0.001), although these changes in color variation (ΔE) were evident from 14 days between each color acquisition (p < 0.05). The unpolished Forma and Filtek Z350XT resin composites showed significantly more color variation than the same polished ones at all times when immersed in a 0.12% CHX-based mouthwash for 30 s daily. In addition, every 14 days, all three resin composites with and without polishing showed a significant color change, while, every 7 days, color stability was maintained. All the resin composites showed clinically acceptable color stability when exposed for up to 14 days to the above-mentioned mouthwash.

Schlagwörter

Stichwörter der Autor:innen

chlorhexidinecolor variationdental materialsdental polishingin vitro studynanohybrid compositeresin composite

Autor:innen und Institutionen

  • School of Stomatology, Universidad Privada San Juan Bautista, Lima 15067, Peru.
  • Research Team "Salud Pública-Salud Integral", Faculty of Dentistry, Postgraduate School, Universidad Nacional Federico Villarreal, Lima 15001, Peru.
  • Faculty of Stomatology, Universidad Inca Garcilaso de la Vega, Lima 15084, Peru.
  • Oral Rehabilitation Department, School of Stomatology, Universidad Científica del Sur, Lima 15067, Peru.
  • Faculdade Do Centro Oeste Paulista, Bauru 17012, Brazil.
  • Faculty of Health Sciences, Professional Academic School of Dentistry, Universidad Privada Norbert Wiener, Lima 15046, Peru.

ORCID-Profile: Leonor Castro-Ramirez, Luis Cervantes-Ganoza, Reynaldo Martínez-Campos, César Cayo-Rojas

Zitieren

APA

Allccahuaman-Avalos, R., Medina-Sánchez, R., Castro-Ramirez, L., Ladera-Castañeda, M., Cervantes-Ganoza, L., Martínez-Campos, R., Solís-Dante, F., Aliaga-Mariñas, A., Verástegui-Sandoval, A., & Cayo-Rojas, C. (2023). In Vitro Color Stability Evaluation of Three Polished and Unpolished Nanohybrid Resin Composites Immersed in a 0.12% Chlorhexidine-Based Mouthwash at Different Times. Polymers, 15(6), 1339. https://doi.org/10.3390/polym15061339

Vancouver

Allccahuaman-Avalos R, Medina-Sánchez R, Castro-Ramirez L, Ladera-Castañeda M, Cervantes-Ganoza L, Martínez-Campos R, et al. In Vitro Color Stability Evaluation of Three Polished and Unpolished Nanohybrid Resin Composites Immersed in a 0.12% Chlorhexidine-Based Mouthwash at Different Times. Polymers. 2023;15(6):1339. doi:10.3390/polym15061339

BibTeX
@article{AllccahuamanAvalos2023,
  author = {Allccahuaman-Avalos, Reyna and Medina-Sánchez, Ramín and Castro-Ramirez, Leonor and Ladera-Castañeda, Marysela and Cervantes-Ganoza, Luis and Martínez-Campos, Reynaldo and Solís-Dante, Fredy and Aliaga-Mariñas, Ana and Verástegui-Sandoval, Arturo and Cayo-Rojas, César},
  title = {In Vitro Color Stability Evaluation of Three Polished and Unpolished Nanohybrid Resin Composites Immersed in a 0.12% Chlorhexidine-Based Mouthwash at Different Times},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {6},
  pages = {1339},
  doi = {10.3390/polym15061339}
}
Kostenlos starten →