Experimental Analysis of Fiber Reinforcement Rings’ Effect on Tensile and Flexural Properties of Onyx™–Kevlar® Composites Manufactured by Continuous Fiber Reinforcement
Polymers · 01.03.2023 · 15 (5) · 1252
DOI: 10.3390/polym15051252 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 01.03.2023. Verfasst von Benjamín Alberto Moreno-Núñez und 5 weiteren Autor:innen. Beteiligte Einrichtung: Tecnologico de Monterrey, School of Engineering and Sciences, Queretaro 76130, Mexico. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Consejo Nacional de Ciencia y Tecnología, Tecnológico de Monterrey.
Abstract (Originalsprache)
Additive manufacturing of composite materials is progressing in the world of 3D printing technologies; composite materials allow the combination of the physical and mechanical properties of two or more constituents to create a new material that meets the required properties of several applications. In this research, the impact of adding Kevlar® reinforcement rings on the tensile and flexural properties of the Onyx™ (nylon with carbon fibers) matrix was analyzed. Parameters such as infill type, infill density and fiber volume percentage were controlled to determine the mechanical response in tensile and flexural tests of the additive manufactured composites. The tested composites showed an increment of four times the tensile modulus and 1.4 times the flexural modulus of pure Onyx™ matrix when compared with that of the Onyx™–Kevlar®. The experimental measurements demonstrated that Kevlar® reinforcement rings can increase the tensile and flexural modulus of Onyx™–Kevlar® composites using low fiber volume percentages (lower than 19% in both samples) and 50% of rectangular infill density. However, the appearance of some defects, such as delamination, was observed and should be further analyzed to obtain products that are errorless and can be reliable for real functions as in automotive or aeronautical industries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Tecnologico de Monterrey, School of Engineering and Sciences, Queretaro 76130, Mexico.
- Tecnologico de Monterrey, Institute of Advanced Materials for Sustainable Manufacturing, Queretaro 76130, Mexico.
- Centro de Ingeniería y Desarrollo Industrial, Pie de la Cuesta 702, Desarrollo San Pablo, Queretaro 76130, Mexico.
ORCID-Profile: Benjamín Alberto Moreno-Núñez, Cecilia D Treviño-Quintanilla, Enrique Cuan-Urquizo, Esmeralda Uribe-Lam
Förderung
- Consejo Nacional de Ciencia y Tecnología
- Tecnológico de Monterrey
Zitieren
APA
Moreno-Núñez, B. A., Abarca-Vidal, C. G., Treviño-Quintanilla, C. D., Sánchez-Santana, U., Cuan-Urquizo, E., & Uribe-Lam, E. (2023). Experimental Analysis of Fiber Reinforcement Rings’ Effect on Tensile and Flexural Properties of Onyx™–Kevlar® Composites Manufactured by Continuous Fiber Reinforcement. Polymers, 15(5), 1252. https://doi.org/10.3390/polym15051252
Vancouver
Moreno-Núñez BA, Abarca-Vidal CG, Treviño-Quintanilla CD, Sánchez-Santana U, Cuan-Urquizo E, Uribe-Lam E. Experimental Analysis of Fiber Reinforcement Rings’ Effect on Tensile and Flexural Properties of Onyx™–Kevlar® Composites Manufactured by Continuous Fiber Reinforcement. Polymers. 2023;15(5):1252. doi:10.3390/polym15051252
BibTeX
@article{MorenoNez2023,
author = {Moreno-Núñez, Benjamín Alberto and Abarca-Vidal, César Gustavo and Treviño-Quintanilla, Cecilia D and Sánchez-Santana, Ulises and Cuan-Urquizo, Enrique and Uribe-Lam, Esmeralda},
title = {Experimental Analysis of Fiber Reinforcement Rings’ Effect on Tensile and Flexural Properties of Onyx™–Kevlar® Composites Manufactured by Continuous Fiber Reinforcement},
journal = {Polymers},
year = {2023},
volume = {15},
number = {5},
pages = {1252},
doi = {10.3390/polym15051252}
}
EUVIMED