EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical and Dynamic Mechanical Behavior of the Lignocellulosic Pine Needle Fiber-Reinforced SEBS Composites

Dinesh iD, Bijender Kumar iD, Jaehwan Kim iD

Polymers · 28.02.2023 · 15 (5) · 1225

DOI: 10.3390/polym15051225 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 28.02.2023. Verfasst von Dinesh und 2 weiteren Autor:innen. Beteiligte Einrichtung: Creative Research Center for Nanocellulose Future Composites, Department of Mechanical Engineering, Inha University, 100 Inha-ro, Michuhol-gu, Incheo…. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Inha University Research Grant.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aiming to generate wealth from waste and due to their significant fire threats to forests and their rich cellulose content, lignocellulosic pine needle fibers (PNFs) are utilized in this study as a reinforcement of the thermoplastic elastomer styrene ethylene butylene styrene (SEBS) matrix to create environmentally friendly and economical PNF/SEBS composites using a maleic anhydride-grafted SEBS compatibilizer. The chemical interaction in the composites studied by FTIR shows that strong ester bonds are formed between reinforcing PNF, the compatibilizer, and the SEBS polymer, leading to strong interfacial adhesion between the PNF and SEBS in the composites. This strong adhesion in the composite exhibits higher mechanical properties than the matrix polymer indicating a 1150 % higher modulus and a 50 % higher strength relative to the matrix. Further, the SEM pictures of the tensile-fractured samples of the composites validate this strong interface. Finally, the prepared composites show better dynamic mechanical behavior indicating higher storage and loss moduli and Tg than the matrix polymer suggesting their potential for engineering applications.

Schlagwörter

Stichwörter der Autor:innen

SEBSdynamic mechanical behaviorfiber/matrix interfacelignocellulosemechanical propertiespine needle fiberthermoplastic elastomer

Autor:innen und Institutionen

  • Creative Research Center for Nanocellulose Future Composites, Department of Mechanical Engineering, Inha University, 100 Inha-ro, Michuhol-gu, Incheon 22212, Republic of Korea.

ORCID-Profile: Dinesh, Bijender Kumar, Jaehwan Kim

Förderung

  • Inha University Research Grant

Zitieren

APA

Dinesh, Kumar, B., & Kim, J. (2023). Mechanical and Dynamic Mechanical Behavior of the Lignocellulosic Pine Needle Fiber-Reinforced SEBS Composites. Polymers, 15(5), 1225. https://doi.org/10.3390/polym15051225

Vancouver

Dinesh, Kumar B, Kim J. Mechanical and Dynamic Mechanical Behavior of the Lignocellulosic Pine Needle Fiber-Reinforced SEBS Composites. Polymers. 2023;15(5):1225. doi:10.3390/polym15051225

BibTeX
@article{Dinesh2023,
  author = {Dinesh and Kumar, Bijender and Kim, Jaehwan},
  title = {Mechanical and Dynamic Mechanical Behavior of the Lignocellulosic Pine Needle Fiber-Reinforced SEBS Composites},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {5},
  pages = {1225},
  doi = {10.3390/polym15051225}
}
Kostenlos starten →