EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Performance Evaluation of Hot Mix Asphalt (HMA) Containing Polyethylene Terephthalate (PET) Using Wet and Dry Mixing Techniques

Nisma Agha iD, Arshad Hussain iD, Agha Shah Ali iD, Yanjun Qiu

Polymers · 27.02.2023 · 15 (5) · 1211

DOI: 10.3390/polym15051211 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 27.02.2023. Verfasst von Nisma Agha und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil and Environmental Engineering (SCEE), National University of Sciences and Technology (NUST), Islamabad 44000, Pakistan. Die Arbeit wurde bisher 49-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study evaluates the performance of Polyethylene Terephthalate (PET)-modified hot mix asphalt. Aggregate, bitumen of grade 60/70 and crushed plastic bottle waste were utilized in this study. Polymer Modified Bitumen (PMB) was prepared using a high shear laboratory type mixer rotating at a speed of 1100 rpm with varying PET content of 2%, 4%, 6%, 8% and 10%, respectively. Overall, the results of preliminary tests suggested that bitumen hardened with the addition of PET. Following optimum bitumen content determination, various modified and controlled HMA samples were prepared as per wet and dry mixing techniques. This research presents an innovative technique to compare the performance of HMA prepared via dry and wet mixing techniques. Performance evaluation tests, which include the Moisture Susceptibility Test (ALDOT-361-88), Indirect Tensile Fatigue Test (ITFT-EN12697-24) and Marshall Stability and Flow Tests (AASHTO T245-90), were conducted on controlled and modified HMA samples. The dry mixing technique yielded better results in terms of resistance against fatigue cracking, stability and flow; however, the wet mixing technique yielded better results in terms of resistance against moisture damage. The addition of PET at more than 4% resulted in a decreased trend for fatigue, stability and flow due to the stiffer nature of PET. However, for the moisture susceptibility test optimum PET content was noted to be 6%. Polyethylene Terephthalate-modified HMA is found to be the economical solution for high volume road construction and maintenance, besides having other significant advantages such as increased sustainability and waste reduction.

Schlagwörter

Stichwörter der Autor:innen

eco-friendlyfatigue lifeflowhot mix asphalt (HMA)moisture susceptibilityplastic bottlespolyethylene terephthalate (PET)polymer-modified bitumen (PMB)recyclestability

Autor:innen und Institutionen

  • School of Civil and Environmental Engineering (SCEE), National University of Sciences and Technology (NUST), Islamabad 44000, Pakistan.
  • School of Civil Engineering, Southwest Jiaotong University, Chengdu 610031, China.

ORCID-Profile: Nisma Agha, Arshad Hussain, Agha Shah Ali

Zitieren

APA

Agha, N., Hussain, A., Ali, A. S., & Qiu, Y. (2023). Performance Evaluation of Hot Mix Asphalt (HMA) Containing Polyethylene Terephthalate (PET) Using Wet and Dry Mixing Techniques. Polymers, 15(5), 1211. https://doi.org/10.3390/polym15051211

Vancouver

Agha N, Hussain A, Ali AS, Qiu Y. Performance Evaluation of Hot Mix Asphalt (HMA) Containing Polyethylene Terephthalate (PET) Using Wet and Dry Mixing Techniques. Polymers. 2023;15(5):1211. doi:10.3390/polym15051211

BibTeX
@article{Agha2023,
  author = {Agha, Nisma and Hussain, Arshad and Ali, Agha Shah and Qiu, Yanjun},
  title = {Performance Evaluation of Hot Mix Asphalt (HMA) Containing Polyethylene Terephthalate (PET) Using Wet and Dry Mixing Techniques},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {5},
  pages = {1211},
  doi = {10.3390/polym15051211}
}
Kostenlos starten →