EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Flame Retardancy and Mechanical Properties of Melt-Spun PA66 Fibers Prepared by End-Group Blocking Technology

Yanpeng Wu, Tonghui Yang, Yongchang Cheng, Tao Huang, Bin Yu, Qilin Wu, Meifang Zhu, Hao Yu iD

Polymers · 26.02.2023 · 15 (5) · 1183

DOI: 10.3390/polym15051183 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 26.02.2023. Verfasst von Yanpeng Wu und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Sha…. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities, Shanghai Sailing Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Preparing flame-retardant polyamide 66 (PA66) fibers through melt spinning remains one of the biggest challenges nowadays. In this work, dipentaerythritol (Di−PE), an eco-friendly flame retardant, was blended into PA66 to prepare PA66/Di−PE composites and fibers. It was confirmed that Di−PE could significantly improve the flame-retardant properties of PA66 by blocking the terminal carboxyl groups, which was conducive to the formation of a continuous and compact char layer and the reduced production of combustible gas. The combustion results of the composites showed that the limiting oxygen index (LOI) increased from 23.5% to 29.4%, and underwriter laboratories 94 (UL-94) passed the V-0 grade. The peak of heat release rate (PHRR), total heat release (THR), and total smoke production (TSP) decreased by 47.3%, 47.8%, and 44.8%, respectively, for the PA66/6 wt% Di−PE composite compared to those recorded for pure PA66. More importantly, the PA66/Di−PE composites possessed excellent spinnability. The prepared fibers still had good mechanical properties (tensile strength: 5.7 ± 0.2 cN/dtex), while maintaining good flame-retardant properties (LOI: 28.6%). This study provides an outstanding industrial production strategy for fabricating flame-retardant PA66 plastics and fibers.

Schlagwörter

Stichwörter der Autor:innen

Di−PEPA66flame retardanceflame retardant mechanismmelt spinning

Autor:innen und Institutionen

  • State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, China.

ORCID-Profile: Hao Yu

Förderung

  • National Natural Science Foundation of China
  • Fundamental Research Funds for the Central Universities
  • Shanghai Sailing Program
  • Shanghai Education Development Foundation and Shanghai Municipal Education Commission
  • Shanghai Education Development Foundation
  • Shanghai Municipal Education Commission

Zitieren

APA

Wu, Y., Yang, T., Cheng, Y., Huang, T., Yu, B., Wu, Q., Zhu, M., & Yu, H. (2023). Flame Retardancy and Mechanical Properties of Melt-Spun PA66 Fibers Prepared by End-Group Blocking Technology. Polymers, 15(5), 1183. https://doi.org/10.3390/polym15051183

Vancouver

Wu Y, Yang T, Cheng Y, Huang T, Yu B, Wu Q, et al. Flame Retardancy and Mechanical Properties of Melt-Spun PA66 Fibers Prepared by End-Group Blocking Technology. Polymers. 2023;15(5):1183. doi:10.3390/polym15051183

BibTeX
@article{Wu2023,
  author = {Wu, Yanpeng and Yang, Tonghui and Cheng, Yongchang and Huang, Tao and Yu, Bin and Wu, Qilin and Zhu, Meifang and Yu, Hao},
  title = {Flame Retardancy and Mechanical Properties of Melt-Spun PA66 Fibers Prepared by End-Group Blocking Technology},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {5},
  pages = {1183},
  doi = {10.3390/polym15051183}
}
Kostenlos starten →