Impact Performance of 3D Printed Spatially Varying Elastomeric Lattices
Polymers · 26.02.2023 · 15 (5) · 1178
DOI: 10.3390/polym15051178 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 26.02.2023. Verfasst von Charles M Dwyer und 9 weiteren Autor:innen. Beteiligte Einrichtung: Advanced Manufacturing Research Center, Youngstown State University, Youngstown, OH 44555, USA. Die Arbeit wurde bisher 27-mal zitiert (Crossref) und nennt 90 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Additive manufacturing is catalyzing a new class of volumetrically varying lattice structures in which the dynamic mechanical response can be tailored for a specific application. Simultaneously, a diversity of materials is now available as feedstock including elastomers, which provide high viscoelasticity and increased durability. The combined benefits of complex lattices coupled with elastomers is particularly appealing for anatomy-specific wearable applications such as in athletic or safety equipment. In this study, Siemens’ DARPA TRADES-funded design and geometry-generation software, Mithril, was leveraged to design vertically-graded and uniform lattices, the configurations of which offer varying degrees of stiffness. The designed lattices were fabricated in two elastomers using different additive manufacturing processes: (a) vat photopolymerization (with compliant SIL30 elastomer from Carbon) and (b) thermoplastic material extrusion (with Ultimaker™ TPU filament providing increased stiffness). Both materials provided unique benefits with the SIL30 material offering compliance suitable for lower energy impacts and the Ultimaker™ TPU offering improved protection against higher impact energies. Moreover, a hybrid lattice combination of both materials was evaluated and demonstrated the simultaneous benefits of each, with good performance across a wider range of impact energies. This study explores the design, material, and process space for manufacturing a new class of comfortable, energy-absorbing protective equipment to protect athletes, consumers, soldiers, first responders, and packaged goods.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Advanced Manufacturing Research Center, Youngstown State University, Youngstown, OH 44555, USA.
- Materials Department, Centro de Investigación Científica de Yucatán, Merida 97205, Mexico.
- Material Science and Engineering, Youngstown State University, Youngstown, OH 44555, USA.
- Aerospace and Mechanical Engineering, University of Texas at El Paso, El Paso, TX 79968, USA.
- Aptiv, 4551 Reseach Pkwy, Warren, OH 44483, USA.
- Siemens Corporation Corporate Technology, Princeton, NJ 08540, USA.
ORCID-Profile: Jose G Carrillo, Jose Angel Diosdado De la Peña, Carolyn Carradero Santiago, Eric MacDonald, Reed M Williams, Bharat Yelamanchi, Pedro Cortes
Zitieren
APA
Dwyer, C. M., Carrillo, J. G., De la Peña, J. A. D., Santiago, C. C., MacDonald, E., Rhinehart, J., Williams, R. M., Burhop, M., Yelamanchi, B., & Cortes, P. (2023). Impact Performance of 3D Printed Spatially Varying Elastomeric Lattices. Polymers, 15(5), 1178. https://doi.org/10.3390/polym15051178
Vancouver
Dwyer CM, Carrillo JG, De la Peña JAD, Santiago CC, MacDonald E, Rhinehart J, et al. Impact Performance of 3D Printed Spatially Varying Elastomeric Lattices. Polymers. 2023;15(5):1178. doi:10.3390/polym15051178
BibTeX
@article{Dwyer2023,
author = {Dwyer, Charles M and Carrillo, Jose G and De la Peña, Jose Angel Diosdado and Santiago, Carolyn Carradero and MacDonald, Eric and Rhinehart, Jerry and Williams, Reed M and Burhop, Mark and Yelamanchi, Bharat and Cortes, Pedro},
title = {Impact Performance of 3D Printed Spatially Varying Elastomeric Lattices},
journal = {Polymers},
year = {2023},
volume = {15},
number = {5},
pages = {1178},
doi = {10.3390/polym15051178}
}
EUVIMED