Highly Flexible Triboelectric Nanogenerator Using Porous Carbon Nanotube Composites
Polymers · 24.02.2023 · 15 (5) · 1135
DOI: 10.3390/polym15051135 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 24.02.2023. Verfasst von Jaehee Shin und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechatronics Engineering, Korea University of Technology & Education, 600, Chungjeol-ro, Byeongcheon-myeon, Dongnam-gu, Chungcheongnam-…. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea (NRF) funded by the Ministry of Education(MOE) through the "Regional Innovation Strategy (RIS)", National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT), Korea Institute for the Advancement of Technology (KIAT) funded by the Korea Government (MOTIE) through the "Competency Development Program for Industry Specia….
Abstract (Originalsprache)
The rapid development of portable and wearable electronic devices has led researchers to actively study triboelectric nanogenerators (TENGs) that can provide self-powering capabilities. In this study, we propose a highly flexible and stretchable sponge-type TENG, named flexible conductive sponge triboelectric nanogenerator (FCS-TENG), which consists of a porous structure manufactured by inserting carbon nanotubes (CNTs) into silicon rubber using sugar particles. Nanocomposite fabrication processes, such as template-directed CVD and ice freeze casting methods for fabricating porous structures, are very complex and costly. However, the nanocomposite manufacturing process of flexible conductive sponge triboelectric nanogenerators is simple and inexpensive. In the tribo-negative CNT/silicone rubber nanocomposite, the CNTs act as electrodes, increasing the contact area between the two triboelectric materials, increasing the charge density, and improving charge transfer between the two phases. Measurements of the performance of flexible conductive sponge triboelectric nanogenerators using an oscilloscope and a linear motor, under a driving force of 2–7 N, show that it generates an output voltage of up to 1120 V and a current of 25.6 µA. In addition, by using different weight percentages of carbon nanotubes (CNTs), it is shown that the output power increases with the weight percentage of carbon nanotubes (CNTs). The flexible conductive sponge triboelectric nanogenerator not only exhibits good performance and mechanical robustness but can also be directly used in light-emitting diodes connected in series. Furthermore, its output remains extremely stable even after 1000 bending cycles in an ambient environment. In sum, the results demonstrate that flexible conductive sponge triboelectric nanogenerators can effectively power small electronics and contribute to large-scale energy harvesting.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechatronics Engineering, Korea University of Technology & Education, 600, Chungjeol-ro, Byeongcheon-myeon, Dongnam-gu, Chungcheongnam-do, Cheonan-si 31253, Republic of Korea.
- Precision Mechanical Process and Control R&D Group, Korea Institute of Industrial Technology (KITECH), 42-7, Baegyang-daero 804 beon-gil, Sasang-gu, Busan 46938, Republic of Korea.
ORCID-Profile: Jaehee Shin, Hanchul Cho, Jinhyoung Park
Förderung
- National Research Foundation of Korea (NRF) funded by the Ministry of Education(MOE) through the "Regional Innovation Strategy (RIS)"
- National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT)
- Korea Institute for the Advancement of Technology (KIAT) funded by the Korea Government (MOTIE) through the "Competency Development Program for Industry Specia…
- National Research Foundation of Korea (NRF) funded by the Ministry of Education (MOE)
- National Research Foundation of Korea (NRF) funded by the Korea Government (MSIT)
- Korea Institute for the Advancement of Technology (KIAT) funded by the Korea Government (MOTIE)
Zitieren
APA
Shin, J., Ji, S., Cho, H., & Park, J. (2023). Highly Flexible Triboelectric Nanogenerator Using Porous Carbon Nanotube Composites. Polymers, 15(5), 1135. https://doi.org/10.3390/polym15051135
Vancouver
Shin J, Ji S, Cho H, Park J. Highly Flexible Triboelectric Nanogenerator Using Porous Carbon Nanotube Composites. Polymers. 2023;15(5):1135. doi:10.3390/polym15051135
BibTeX
@article{Shin2023,
author = {Shin, Jaehee and Ji, Sungho and Cho, Hanchul and Park, Jinhyoung},
title = {Highly Flexible Triboelectric Nanogenerator Using Porous Carbon Nanotube Composites},
journal = {Polymers},
year = {2023},
volume = {15},
number = {5},
pages = {1135},
doi = {10.3390/polym15051135}
}
EUVIMED