EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Comparative Study on the Microscale and Macroscale Mechanical Properties of Dental Resin Composites

Shuogeng Yan, Kun Wang, Zhengzhi Wang iD

Polymers · 23.02.2023 · 15 (5) · 1129

DOI: 10.3390/polym15051129 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 23.02.2023. Verfasst von Shuogeng Yan und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering Mechanics, School of Civil Engineering, Wuhan University, Wuhan 430072, China. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The National Natural Science Foundation of China, the Guangdong Basic and Applied Basic Research Foundation, the Shenzhen Science and Technology Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Dental resin composites are universal restorative materials, and various kinds of fillers are used to reinforce their mechanical properties. However, a combined study on the microscale and macroscale mechanical properties of dental resin composites is missing, and the reinforcing mechanism of the composites is still not fully clarified. In this work, the effects of the nano-silica particle on the mechanical properties of dental resin composites were studied by combined dynamic nanoindentation tests and macroscale tensile tests. The reinforcing mechanism of the composites was explored by combining near-infrared spectroscopy, scanning electron microscope, and atomic force microscope characterizations. It was found that the tensile modulus increased from 2.47 GPa to 3.17 GPa, and the ultimate tensile strength increased from 36.22 MPa to 51.75 MPa, with the particle contents increasing from 0% to 10%. From the nanoindentation tests, the storage modulus and hardness of the composites increased by 36.27% and 40.90%, respectively. The storage modulus and hardness were also found to increase by 44.11% and 46.46% when the testing frequency increased from 1 Hz to 210 Hz. Moreover, based on a modulus mapping technique, we found a boundary layer in which the modulus gradually decreased from the edge of the nanoparticle to the resin matrix. Finite element modeling was adopted to illustrate the role of this gradient boundary layer in alleviating the shear stress concentration on the filler–matrix interface. The present study validates mechanical reinforcement and provides a potential new insight for understanding the reinforcing mechanism of dental resin composites.

Schlagwörter

Stichwörter der Autor:innen

degree of conversiongradient boundary layermechanical propertiesmechanical reinforcementnanoindentationphotopolymerization

Autor:innen und Institutionen

  • Department of Engineering Mechanics, School of Civil Engineering, Wuhan University, Wuhan 430072, China.
  • Wuhan University Shenzhen Research Institute, Shenzhen 518108, China.

ORCID-Profile: Zhengzhi Wang

Förderung

  • The National Natural Science Foundation of China
  • the Guangdong Basic and Applied Basic Research Foundation
  • the Shenzhen Science and Technology Program
  • the Basic Research Program of Central Government Funds for Shenzhen Science and Technology Development
  • National Natural Science Foundation of China
  • Guangdong Basic and Applied Basic Research Foundation
  • Shenzhen Science and Technology Program
  • Basic Research Program of Central Government Funds for Shenzhen Science and Technology Development

Zitieren

APA

Yan, S., Wang, K., & Wang, Z. (2023). A Comparative Study on the Microscale and Macroscale Mechanical Properties of Dental Resin Composites. Polymers, 15(5), 1129. https://doi.org/10.3390/polym15051129

Vancouver

Yan S, Wang K, Wang Z. A Comparative Study on the Microscale and Macroscale Mechanical Properties of Dental Resin Composites. Polymers. 2023;15(5):1129. doi:10.3390/polym15051129

BibTeX
@article{Yan2023,
  author = {Yan, Shuogeng and Wang, Kun and Wang, Zhengzhi},
  title = {A Comparative Study on the Microscale and Macroscale Mechanical Properties of Dental Resin Composites},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {5},
  pages = {1129},
  doi = {10.3390/polym15051129}
}
Kostenlos starten →