EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Promotion of In Vitro Osteogenic Activity by Melt Extrusion-Based PLLA/PCL/PHBV Scaffolds Enriched with Nano-Hydroxyapatite and Strontium Substituted Nano-Hydroxyapatite

Georgia-Ioanna Kontogianni, Amedeo Franco Bonatti iD, Carmelo De Maria iD, Raasti Naseem iD, Priscila Melo, Catarina Coelho iD, Giovanni Vozzi iD, Kenneth Dalgarno, Paulo Quadros iD, Chiara Vitale-Brovarone, Maria Chatzinikolaidou iD

Polymers · 20.02.2023 · 15 (4) · 1052

DOI: 10.3390/polym15041052 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 20.02.2023. Verfasst von Georgia-Ioanna Kontogianni und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Technology, University of Crete, 70013 Heraklion, Greece. Die Arbeit wurde bisher 41-mal zitiert (Crossref) und nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union's Horizon 2020, the European Union’s Horizon 2020.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bone tissue engineering has emerged as a promising strategy to overcome the limitations of current treatments for bone-related disorders, but the trade-off between mechanical properties and bioactivity remains a concern for many polymeric materials. To address this need, novel polymeric blends of poly-L-lactic acid (PLLA), polycaprolactone (PCL) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) have been explored. Blend filaments comprising PLLA/PCL/PHBV at a ratio of 90/5/5 wt% have been prepared using twin-screw extrusion. The PLLA/PCL/PHBV blends were enriched with nano-hydroxyapatite (nano-HA) and strontium-substituted nano-HA (Sr-nano-HA) to produce composite filaments. Three-dimensional scaffolds were printed by fused deposition modelling from PLLA/PCL/PHBV blend and composite filaments and evaluated mechanically and biologically for their capacity to support bone formation in vitro. The composite scaffolds had a mean porosity of 40%, mean pores of 800 µm, and an average compressive modulus of 32 MPa. Polymer blend and enriched scaffolds supported cell attachment and proliferation. The alkaline phosphatase activity and calcium production were significantly higher in composite scaffolds compared to the blends. These findings demonstrate that thermoplastic polyesters (PLLA and PCL) can be combined with polymers produced via a bacterial route (PHBV) to produce polymer blends with excellent biocompatibility, providing additional options for polymer blend optimization. The enrichment of the blend with nano-HA and Sr-nano-HA powders enhanced the osteogenic potential in vitro.

Schlagwörter

Stichwörter der Autor:innen

3D printingPCLPHBVPLLAbone tissue engineeringcomposite scaffoldsextrusionfused deposition modeling (FDM)

Autor:innen und Institutionen

  • Department of Materials Science and Technology, University of Crete, 70013 Heraklion, Greece.
  • Research Center E. Piaggio and Department of Information Engineering, University of Pisa, 56126 Pisa, Italy.
  • School of Engineering, Newcastle University, Newcastle upon Tyne NE1 7RU, UK.
  • FLUIDINOVA S.A., 4475-188 Maia, Portugal.
  • Department of Applied Science and Technology, Politecnico di Torino, 10129 Turin, Italy.
  • Foundation for Research and Technology Hellas (FORTH)-IESL, 70013 Heraklion, Greece.

ORCID-Profile: Amedeo Franco Bonatti, Carmelo De Maria, Raasti Naseem, Catarina Coelho, Giovanni Vozzi, Paulo Quadros, Maria Chatzinikolaidou

Förderung

  • European Union's Horizon 2020
  • the European Union’s Horizon 2020

Zitieren

APA

Kontogianni, G. I., Bonatti, A. F., De Maria, C., Naseem, R., Melo, P., Coelho, C., Vozzi, G., Dalgarno, K., Quadros, P., Vitale-Brovarone, C., & Chatzinikolaidou, M. (2023). Promotion of In Vitro Osteogenic Activity by Melt Extrusion-Based PLLA/PCL/PHBV Scaffolds Enriched with Nano-Hydroxyapatite and Strontium Substituted Nano-Hydroxyapatite. Polymers, 15(4), 1052. https://doi.org/10.3390/polym15041052

Vancouver

Kontogianni GI, Bonatti AF, De Maria C, Naseem R, Melo P, Coelho C, et al. Promotion of In Vitro Osteogenic Activity by Melt Extrusion-Based PLLA/PCL/PHBV Scaffolds Enriched with Nano-Hydroxyapatite and Strontium Substituted Nano-Hydroxyapatite. Polymers. 2023;15(4):1052. doi:10.3390/polym15041052

BibTeX
@article{Kontogianni2023,
  author = {Kontogianni, Georgia-Ioanna and Bonatti, Amedeo Franco and De Maria, Carmelo and Naseem, Raasti and Melo, Priscila and Coelho, Catarina and Vozzi, Giovanni and Dalgarno, Kenneth and Quadros, Paulo and Vitale-Brovarone, Chiara and Chatzinikolaidou, Maria},
  title = {Promotion of In Vitro Osteogenic Activity by Melt Extrusion-Based PLLA/PCL/PHBV Scaffolds Enriched with Nano-Hydroxyapatite and Strontium Substituted Nano-Hydroxyapatite},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {4},
  pages = {1052},
  doi = {10.3390/polym15041052}
}
Kostenlos starten →