EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Conductive and Thermo-Responsive Composite Hydrogels with Poly(N-isopropylacrylamide) and Carbon Nanotubes Fabricated by Two-Step Photopolymerization

Gianluca Ciarleglio iD, Elisa Toto, Maria Gabriella Santonicola iD

Polymers · 18.02.2023 · 15 (4) · 1022

DOI: 10.3390/polym15041022 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 18.02.2023. Verfasst von Gianluca Ciarleglio und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Engineering Materials Environment, Sapienza University of Rome, Via del Castro Laurenziano 7, 00161 Rome, Italy. Die Arbeit wurde bisher 50-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Sapienza University of Rome.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biocompatible and conductive polymer hydrogels are the subject of intensive research in the bioengineering field because of their use in bioelectronic devices and for the fabrication of electro-responsive tissues and drug delivery systems. In this study, we report the synthesis of conductive composite hydrogels consisting of a poly(N-isopropylacrylamide) (PNIPAM) matrix embedding carboxyl-functionalized multi-walled carbon nanotubes (MWCNT-COOH) using a two-step photopolymerization method. Thermo-responsive hydrogels with controlled hydrophilicity and conductivity were prepared by varying the carbon nanotube concentration in the range 0.5–3 wt%. The thermal response of the PNIPAM-based composite hydrogels was measured by differential scanning calorimetry with both ultrapure water and PBS solution as swelling liquid. Results show that the endothermic peak associated with the temperature-induced volume phase transition (VPT) shifts to higher temperatures upon increasing the concentration of the nanotubes, indicating that more energy is required to dissociate the hydrogen bonds of the polymer/filler network. In PBS solution, the swelling ratios and the VPT temperatures of the composite hydrogels are reduced because of salt-induced screening of the oppositely charged polymer/filler assembly, and the electrical resistivity decreases by a factor of 10 with respect to the water-swollen hydrogels.

Schlagwörter

Stichwörter der Autor:innen

calorimetrycarbon nanotubeshydrogelsphotopolymerizationpoly(N-isopropylacrylamide)

Autor:innen und Institutionen

  • Department of Chemical Engineering Materials Environment, Sapienza University of Rome, Via del Castro Laurenziano 7, 00161 Rome, Italy.

ORCID-Profile: Gianluca Ciarleglio, Maria Gabriella Santonicola

Förderung

  • Sapienza University of Rome

Zitieren

APA

Ciarleglio, G., Toto, E., & Santonicola, M. G. (2023). Conductive and Thermo-Responsive Composite Hydrogels with Poly(N-isopropylacrylamide) and Carbon Nanotubes Fabricated by Two-Step Photopolymerization. Polymers, 15(4), 1022. https://doi.org/10.3390/polym15041022

Vancouver

Ciarleglio G, Toto E, Santonicola MG. Conductive and Thermo-Responsive Composite Hydrogels with Poly(N-isopropylacrylamide) and Carbon Nanotubes Fabricated by Two-Step Photopolymerization. Polymers. 2023;15(4):1022. doi:10.3390/polym15041022

BibTeX
@article{Ciarleglio2023,
  author = {Ciarleglio, Gianluca and Toto, Elisa and Santonicola, Maria Gabriella},
  title = {Conductive and Thermo-Responsive Composite Hydrogels with Poly(N-isopropylacrylamide) and Carbon Nanotubes Fabricated by Two-Step Photopolymerization},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {4},
  pages = {1022},
  doi = {10.3390/polym15041022}
}
Kostenlos starten →