Enhancing the Mechanical Properties of Historical Masonry Using Fiber-Reinforced Geopolymers
Polymers · 17.02.2023 · 15 (4) · 1017
DOI: 10.3390/polym15041017 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 17.02.2023. Verfasst von Ithan Jessemar R Dollente und 8 weiteren Autor:innen. Beteiligte Einrichtung: Center for Engineering and Sustainable Development Research, De La Salle University, Manila 1004, Philippines. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Science and Technology, Department of Science and Technology (DOST)—Philippine Council for Industry, Energy and Emerging Technology Research and Development (PCIERRD).
Abstract (Originalsprache)
Current research into the production of sustainable construction materials for retrofitting and strengthening historic structures has been rising, with geopolymer technology being seen as an advantageous alternative to traditional concrete. Fiber reinforcement using this novel cementitious material involves a low embodied carbon footprint while ensuring cohesiveness with local materials. This study aims to develop fly ash-based geopolymers reinforced with six different types of fibers: polyvinyl alcohol, polypropylene, chopped basalt, carbon fiber, and copper-coated stainless steel. The samples are produced by mixing the geopolymer mortar in random distribution and content. Twenty-eight geopolymer mixes are evaluated through compressive strength, split-tensile strength, and modulus of elasticity to determine the fiber mix with the best performance compared with pure geopolymer mortar as a control. Polyvinyl alcohol and copper-coated stainless-steel fiber samples had considerably high mechanical properties and fracture toughness under applied tensile loads. However, the polypropylene fiber source did not perform well and had lower mechanical properties. One-way ANOVA verifies these results. Based on these findings, polyvinyl alcohol and stainless-steel fibers are viable options for fiber reinforcement in historical structures, and further optimization and testing are recommended before application as a reinforcement material in historic structures.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Center for Engineering and Sustainable Development Research, De La Salle University, Manila 1004, Philippines.
- Department of Civil Engineering, De La Salle University, Manila 0922, Philippines.
- Department of Chemical Engineering, De La Salle University, Manila 0922, Philippines.
- Department of Civil Engineering, University of Guam, Mangilao 96923, Guam.
ORCID-Profile: Ithan Jessemar R Dollente, Pauline Rose J Quiatchon, Ma Beatrice D Villoria, Michael Angelo B Promentilla, Jason Maximino C Ongpeng
Förderung
- Department of Science and Technology
- Department of Science and Technology (DOST)—Philippine Council for Industry, Energy and Emerging Technology Research and Development (PCIERRD)
Zitieren
APA
Dollente, I. J. R., Valerio, D. N. R., Quiatchon, P. R. J., Abulencia, A. B., Villoria, M. B. D., Garciano, L. E. O., Promentilla, M. A. B., Guades, E. J., & Ongpeng, J. M. C. (2023). Enhancing the Mechanical Properties of Historical Masonry Using Fiber-Reinforced Geopolymers. Polymers, 15(4), 1017. https://doi.org/10.3390/polym15041017
Vancouver
Dollente IJR, Valerio DNR, Quiatchon PRJ, Abulencia AB, Villoria MBD, Garciano LEO, et al. Enhancing the Mechanical Properties of Historical Masonry Using Fiber-Reinforced Geopolymers. Polymers. 2023;15(4):1017. doi:10.3390/polym15041017
BibTeX
@article{Dollente2023,
author = {Dollente, Ithan Jessemar R and Valerio, Daniel Nichol R and Quiatchon, Pauline Rose J and Abulencia, Anabel B and Villoria, Ma Beatrice D and Garciano, Lessandro Estelito O and Promentilla, Michael Angelo B and Guades, Ernesto J and Ongpeng, Jason Maximino C},
title = {Enhancing the Mechanical Properties of Historical Masonry Using Fiber-Reinforced Geopolymers},
journal = {Polymers},
year = {2023},
volume = {15},
number = {4},
pages = {1017},
doi = {10.3390/polym15041017}
}
EUVIMED