Can Pyrolysis Oil Be Used as a Feedstock to Close the Gap in the Circular Economy of Polyolefins?
Polymers · 09.02.2023 · 15 (4) · 859
DOI: 10.3390/polym15040859 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 09.02.2023. Verfasst von Berrak Erkmen und 3 weiteren Autor:innen. Beteiligte Einrichtung: SOCAR Turkey R&D and Innovation Inc., SOCAR Turkey, Izmir 35800, Turkey. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Plastics are engineering marvels that have found widespread use in all aspects of modern life. However, poor waste management practices and inefficient recycling technologies, along with their extremely high durability, have caused one of the major environmental problems facing humankind: waste plastic pollution. The upcycling of waste plastics to chemical feedstock to produce virgin plastics has emerged as a viable option to mitigate the adverse effects of plastic pollution and close the gap in the circular economy of plastics. Pyrolysis is considered a chemical recycling technology to upcycle waste plastics. Yet, whether pyrolysis as a stand-alone technology can achieve true circularity or not requires further investigation. In this study, we analyzed and critically evaluated whether oil obtained from the non-catalytic pyrolysis of virgin polypropylene (PP) can be used as a feedstock for naphtha crackers to produce olefins, and subsequently polyolefins, without undermining the circular economy and resource efficiency. Two different pyrolysis oils were obtained from a pyrolysis plant and compared with light and heavy naphtha by a combination of physical and chromatographic methods, in accordance with established standards. The results demonstrate that pyrolysis oil consists of mostly cyclic olefins with a bromine number of 85 to 304, whereas light naphtha consists of mostly paraffinic hydrocarbons with a very low olefinic content and a bromine number around 1. Owing to the compositional differences, pyrolysis oil studied herein is completely different than naphtha in terms of hydrocarbon composition and cannot be used as a feedstock for commercial naphtha crackers to produce olefins. The findings are of particular importance to evaluating different chemical recycling opportunities with respect to true circularity and may serve as a benchmark to determine whether liquids obtained from different polyolefin recycling technologies are compatible with existing industrial steam crackers’ feedstock.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- SOCAR Turkey R&D and Innovation Inc., SOCAR Turkey, Izmir 35800, Turkey.
- Refinery and Petrochemicals Business Unit, SOCAR Turkey, Izmir 35800, Turkey.
- Chemical Engineering Department, Middle East Technical University, Ankara 06800, Turkey.
ORCID-Profile: Berrak Erkmen, Adem Ozdogan
Zitieren
APA
Erkmen, B., Ozdogan, A., Ezdesir, A., & Celik, G. (2023). Can Pyrolysis Oil Be Used as a Feedstock to Close the Gap in the Circular Economy of Polyolefins?. Polymers, 15(4), 859. https://doi.org/10.3390/polym15040859
Vancouver
Erkmen B, Ozdogan A, Ezdesir A, Celik G. Can Pyrolysis Oil Be Used as a Feedstock to Close the Gap in the Circular Economy of Polyolefins?. Polymers. 2023;15(4):859. doi:10.3390/polym15040859
BibTeX
@article{Erkmen2023,
author = {Erkmen, Berrak and Ozdogan, Adem and Ezdesir, Ayhan and Celik, Gokhan},
title = {Can Pyrolysis Oil Be Used as a Feedstock to Close the Gap in the Circular Economy of Polyolefins?},
journal = {Polymers},
year = {2023},
volume = {15},
number = {4},
pages = {859},
doi = {10.3390/polym15040859}
}
EUVIMED