EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Recycling of Ethylene-Vinyl Acetate/Carbon Nanotube Nanocomposites: Processing, Thermal, Rheological, Mechanical and Electrical Behavior

Ionut-Laurentiu Sandu iD, Felicia Stan, Catalin Fetecau

Polymers · 23.01.2023 · 15 (3) · 583

DOI: 10.3390/polym15030583 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 23.01.2023. Verfasst von Ionut-Laurentiu Sandu und 2 weiteren Autor:innen. Beteiligte Einrichtung: Center of Excellence Polymer Processing, Dunarea de Jos University of Galati, 47 Domneasca, 800 008 Galati, Romania. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 89 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: "Dunarea de Jos" University of Galati, “Dunarea de Jos” University of Galati.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recycling polymer/carbon nanotube (CNT) nanocomposites is not well common, despite a growing interest in using polymer/carbon nanotube (CNT) nanocomposites in industrial applications. In this study, the influence of mechanical recycling on the thermal, rheological, mechanical and electrical behavior of ethylene-vinyl acetate (EVA)/CNT nanocomposites is investigated. EVA/CNT nanocomposite with different amounts of CNTs (1, 3 and 5 wt.%) was subjected to mechanical grinding and reprocessing by injection molding in a close-loop up to three cycles, and the changes induced by mechanical recycling were monitored by Differential Scanning Calorimetry (DSC), capillary rheology, scanning electron microscopy (SEM), electrical resistance and tensile tests. It was found that the EVA/CNT nanocomposites did not exhibit significant changes in thermal and flow behavior due to mechanical recycling and reprocessing. The recycled EVA/CNT nanocomposites retain close to 75% of the original elastic modulus after three recycling cycles and about 80–90% in the tensile strength, depending on the CNT loading. The electrical conductivity of the recycled nanocomposites was about one order of magnitude lower as compared with the virgin nanocomposites, spanning the insulating to semi-conducting range (10−9 S/m–10−2 S/m) depending on the CNT loading. With proper control of the injection molding temperature and CNT loading, a balance between the mechanical and electrical properties of the recycled EVA nanocomposites can be reached, showing a potential to be used in practical applications.

Schlagwörter

Stichwörter der Autor:innen

capillary rheometrycarbon nanotubeselectrical conductivityethylene-vinyl acetateinjection moldingmechanical propertiesmechanical recyclingthermal behavior

Autor:innen und Institutionen

  • Center of Excellence Polymer Processing, Dunarea de Jos University of Galati, 47 Domneasca, 800 008 Galati, Romania.

ORCID-Profile: Ionut-Laurentiu Sandu

Förderung

  • "Dunarea de Jos" University of Galati
  • “Dunarea de Jos” University of Galati

Zitieren

APA

Sandu, I. L., Stan, F., & Fetecau, C. (2023). Mechanical Recycling of Ethylene-Vinyl Acetate/Carbon Nanotube Nanocomposites: Processing, Thermal, Rheological, Mechanical and Electrical Behavior. Polymers, 15(3), 583. https://doi.org/10.3390/polym15030583

Vancouver

Sandu IL, Stan F, Fetecau C. Mechanical Recycling of Ethylene-Vinyl Acetate/Carbon Nanotube Nanocomposites: Processing, Thermal, Rheological, Mechanical and Electrical Behavior. Polymers. 2023;15(3):583. doi:10.3390/polym15030583

BibTeX
@article{Sandu2023,
  author = {Sandu, Ionut-Laurentiu and Stan, Felicia and Fetecau, Catalin},
  title = {Mechanical Recycling of Ethylene-Vinyl Acetate/Carbon Nanotube Nanocomposites: Processing, Thermal, Rheological, Mechanical and Electrical Behavior},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {3},
  pages = {583},
  doi = {10.3390/polym15030583}
}
Kostenlos starten →