EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of Porous-Polyacrylonitrile-Based Fibers Using Nanocellulose Additives as Precursor for Carbon Fiber Manufacturing

Iris Kruppke iD, Fawzy Sherif, Mirko Richter iD, Chokri Cherif

Polymers · 21.01.2023 · 15 (3) · 565

DOI: 10.3390/polym15030565 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 21.01.2023. Verfasst von Iris Kruppke und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Textile Machinery and High Performance Material Technology (ITM), Technical University Dresden (TUD), 01069 Dresden, Germany. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Dresden Fellowship Programme, TU Dresden, European Social Fund and the Free State of Saxony, European Social Fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cellulose is a renewable and environmentally friendly raw material that has an important economic and technical impact in several applications. Recently, nanocellulose (NC) presented a promising road to support the manufacturing of functional carbon fibers (CFs), which are considered superior materials for several applications because of their outstanding properties. However, the smooth and limited effective surface areas make CFs virtually useless in some applications, such as energy storage. Therefore, strategies to increase the porosity of CFs are highly desirable to realize their potential. Within this article, we present an approach that focuses on the designing of porous CF precursors using polyacrilonitrile (PAN) and NC additives using a wet spinning method. To enhance the porosity, two jet stretching (50% and 100%) and four NC additive amounts (0 wt.%, 0.1 wt.%, 0.4 wt.% and 0.8 wt.%) have been applied and investigated. In comparison with the reference PAN fibers (without NC additives and stretching), the results showed an increase in specific surface area from 10.45 m2/g to 138.53 m2/g and in total pore volume from 0.03 cm3/g to 0.49 cm3/g. On the other hand, mechanical properties have been affected negatively by NC additives and the stretching process. Stabilization and carbonization processes could be applied in a future study to support the production of multifunctional porous CF.

Schlagwörter

Stichwörter der Autor:innen

nanocellulosepolyacrilonitrileporous fibersprecursorsprocess developmentwet spinning

Autor:innen und Institutionen

  • Institute of Textile Machinery and High Performance Material Technology (ITM), Technical University Dresden (TUD), 01069 Dresden, Germany.
  • Research Center Carbon Fibers Saxony (RCCF), Technische Universität Dresden, 01237 Dresden, Germany.
  • Department of Clothing and Textiles, Faculty of Home Economis, Menoufia University, Shibin El Kom 6131567, Menofia Governorate, Egypt.

ORCID-Profile: Iris Kruppke, Mirko Richter

Förderung

  • Dresden Fellowship Programme, TU Dresden
  • European Social Fund and the Free State of Saxony
  • European Social Fund

Zitieren

APA

Kruppke, I., Sherif, F., Richter, M., & Cherif, C. (2023). Development of Porous-Polyacrylonitrile-Based Fibers Using Nanocellulose Additives as Precursor for Carbon Fiber Manufacturing. Polymers, 15(3), 565. https://doi.org/10.3390/polym15030565

Vancouver

Kruppke I, Sherif F, Richter M, Cherif C. Development of Porous-Polyacrylonitrile-Based Fibers Using Nanocellulose Additives as Precursor for Carbon Fiber Manufacturing. Polymers. 2023;15(3):565. doi:10.3390/polym15030565

BibTeX
@article{Kruppke2023,
  author = {Kruppke, Iris and Sherif, Fawzy and Richter, Mirko and Cherif, Chokri},
  title = {Development of Porous-Polyacrylonitrile-Based Fibers Using Nanocellulose Additives as Precursor for Carbon Fiber Manufacturing},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {3},
  pages = {565},
  doi = {10.3390/polym15030565}
}
Kostenlos starten →