EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Temperature Effects on the Crystalline Structure of iPP Containing Different Solvent-Treated TMB-5 Nucleating Agents

Baojing Luo, Sheng Xu iD, Jing Yang, Qing Zhang iD, Jing Yu, Lihua Liu, Xiangjun Meng

Polymers · 18.01.2023 · 15 (3) · 514

DOI: 10.3390/polym15030514 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 18.01.2023. Verfasst von Baojing Luo und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Tangshan Normal University, Tangshan 063000, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Scientific Research Foundation Project of Tangshan Normal University, Natural Science Foundation of Tianjin City.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

TMB-5 nucleating agent (NA) treated by different solvents were used as the β-NA of iPP. The effects of temperature on the crystalline structure of different iPP/TMB-5, as well as the crystallization and melting behaviors were investigated. It was found that strong polar solvent treated TMB-5 (TMB-5DMSO and TMB-5DMF) could induce more β-crystal at high Tc = 140 °C than the other TMB-5 NAs, while the β-crystal inducing efficiency of untreated TMB-5 (TMB-5UT) and non-polar solvent treated TMB-5 (TMB-5LP) is seriously reduced at high Tc = 140 °C. TMB-5DMSO can induce a high and stable content of β-crystal with Kβ = 83–94% within Tc = 90–140 °C, and TMB-5ODCB can induce a high content of β-crystal with Kβ > 91.3% within Tc = 90–130 °C. TMB-5DMF is the most temperature-sensitive one, but can induce a high fraction of β-crystal with Kβ > 92% both at low Tc = 90 °C and high Tc = 140 °C. High temperature pre-crystallization at Tpc = 150 °C tremendously reduces the β-crystal inducing efficiency of all TMB-5 NAs. TMB-5UT and TMB-5LP exhibit higher nucleating efficiency than TMB-5DMSO, TMB-5DMF and TMB-5ODCB. During the non-isothermal crystallization process, TMB-5UT induced β-crystal possesses higher structural perfection and stability, while TMB-5LP is more likely to induce α-crystal with considerable quantity and stability. The structural perfection and stability of TMB-5 induced β-crystal can be enhanced with appropriate increasing of Tc.

Schlagwörter

Stichwörter der Autor:innen

TMB-5crystalline structureiPPnucleating agenttemperature

Autor:innen und Institutionen

  • Department of Chemistry, Tangshan Normal University, Tangshan 063000, China.
  • Hebei Provincial Key Laboratory of Degradable Polymers, Tangshan Normal University, Tangshan 063000, China.
  • Department of Software and Communication, Tianjin Sino-German University of Applied Sciences, Tianjin 300072, China.

ORCID-Profile: Sheng Xu, Qing Zhang

Förderung

  • Scientific Research Foundation Project of Tangshan Normal University
  • Natural Science Foundation of Tianjin City

Zitieren

APA

Luo, B., Xu, S., Yang, J., Zhang, Q., Yu, J., Liu, L., & Meng, X. (2023). Temperature Effects on the Crystalline Structure of iPP Containing Different Solvent-Treated TMB-5 Nucleating Agents. Polymers, 15(3), 514. https://doi.org/10.3390/polym15030514

Vancouver

Luo B, Xu S, Yang J, Zhang Q, Yu J, Liu L, et al. Temperature Effects on the Crystalline Structure of iPP Containing Different Solvent-Treated TMB-5 Nucleating Agents. Polymers. 2023;15(3):514. doi:10.3390/polym15030514

BibTeX
@article{Luo2023,
  author = {Luo, Baojing and Xu, Sheng and Yang, Jing and Zhang, Qing and Yu, Jing and Liu, Lihua and Meng, Xiangjun},
  title = {Temperature Effects on the Crystalline Structure of iPP Containing Different Solvent-Treated TMB-5 Nucleating Agents},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {3},
  pages = {514},
  doi = {10.3390/polym15030514}
}
Kostenlos starten →