EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Green Approach for Recycling Compact Discs

Francesco Paolo La Mantia iD, Domenico Liarda, Manuela Ceraulo, Maria Chiara Mistretta

Polymers · 17.01.2023 · 15 (3) · 491

DOI: 10.3390/polym15030491 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 17.01.2023. Verfasst von Francesco Paolo La Mantia und 3 weiteren Autor:innen. Beteiligte Einrichtung: Dipartimento di Ingegneria, Università di Palermo, Viale delle Scienze, 90128 Palermo, Italy. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Compact discs (CDs) and digital versatile discs (DVDs) are mainly made by polycarbonate disc, a thin layer of aluminum or silver, a thin layer of a coating and a thin layer of a label of paper or PET. The recycling of these discs is difficult due to the removal of these non-polymeric layers and to our best knowledge, no industrial plants have been resent for their recycling. In this work, we propose a facile way to remove the non-polymeric layers and investigate the effect of the repetitive extrusion process on the processability and on the mechanical properties of the recycled polycarbonate. A few works have been published dealing with both the removal of the non-polymeric layers and the mechanical recycling of the disk of polycarbonate. In our approach, the removal of the non-polymeric layers is easily obtained through a thermo-mechanical treatment in a basic solution by ammonia. This process can be considered green because is made at a low temperature with a small amount of water and a very small amount of ammonia, saving energy and water. The properties of the polycarbonate remain good if the mechanical recycling is made after drying the post-consumer polycarbonate.

Schlagwörter

Stichwörter der Autor:innen

compact discspolycarbonaterecyclingsustainable method

Autor:innen und Institutionen

  • Dipartimento di Ingegneria, Università di Palermo, Viale delle Scienze, 90128 Palermo, Italy.
  • INSTM, Consorzio Interuniversitario Nazionale di Scienza e Tecnologia dei Materiali, Via Giusti n. 9, 50121 Florence, Italy.

ORCID-Profile: Francesco Paolo La Mantia

Zitieren

APA

La Mantia, F. P., Liarda, D., Ceraulo, M., & Mistretta, M. C. (2023). A Green Approach for Recycling Compact Discs. Polymers, 15(3), 491. https://doi.org/10.3390/polym15030491

Vancouver

La Mantia FP, Liarda D, Ceraulo M, Mistretta MC. A Green Approach for Recycling Compact Discs. Polymers. 2023;15(3):491. doi:10.3390/polym15030491

BibTeX
@article{LaMantia2023,
  author = {La Mantia, Francesco Paolo and Liarda, Domenico and Ceraulo, Manuela and Mistretta, Maria Chiara},
  title = {A Green Approach for Recycling Compact Discs},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {3},
  pages = {491},
  doi = {10.3390/polym15030491}
}
Kostenlos starten →