Interfacial Engineering Methods in Thermoplastic Composites: An Overview
Polymers · 12.01.2023 · 15 (2) · 415
DOI: 10.3390/polym15020415 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Polymers, online erschienen am 12.01.2023. Verfasst von Kailashbalan Periasamy und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Engineering, RMIT University, Melbourne, VIC 3001, Australia. Die Arbeit wurde bisher 94-mal zitiert (Crossref) und nennt 123 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The paper critically analyzed different interfacial enhancing methods used in thermoplastic composites. Although the absence of cross-linked polymer chains and chemical bonds on solidification enables the thermoplastics to be remelted, it creates weak interfacial adhesion between fibre reinforcements and the thermoplastic matrix. The weak fibre-matrix interface bonding reduces the efficiency with which the applied load can be transferred between these composite constituents, causing the composite to fail prematurely. Their need for high-temperature processing, poor compatibility with other polymer matrices, and relatively high viscosity render thermoplastics challenging when used to manufacture composite laminates. Therefore, various methods, including nanoparticles, changing the polarity of the fibre surface by plasma etching, chemical treatment with ozone, or an oxidative attack at the fibre surface, have been applied to improve the fibre/matrix bonding in thermoplastic composites. The fabrication steps followed in these techniques, their progress in research, and the associated toughening mechanisms are comprehensively discussed in this paper. The effect of different fibre-matrix interfacial enhancement methods on the mechanical properties of thermoplastic composites is also deliberated.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Engineering, RMIT University, Melbourne, VIC 3001, Australia.
ORCID-Profile: Kailashbalan Periasamy
Zitieren
APA
Periasamy, K., Kandare, E., Das, R., Darouie, M., & Khatibi, A. A. (2023). Interfacial Engineering Methods in Thermoplastic Composites: An Overview. Polymers, 15(2), 415. https://doi.org/10.3390/polym15020415
Vancouver
Periasamy K, Kandare E, Das R, Darouie M, Khatibi AA. Interfacial Engineering Methods in Thermoplastic Composites: An Overview. Polymers. 2023;15(2):415. doi:10.3390/polym15020415
BibTeX
@article{Periasamy2023,
author = {Periasamy, Kailashbalan and Kandare, Everson and Das, Raj and Darouie, Maryam and Khatibi, Akbar A},
title = {Interfacial Engineering Methods in Thermoplastic Composites: An Overview},
journal = {Polymers},
year = {2023},
volume = {15},
number = {2},
pages = {415},
doi = {10.3390/polym15020415}
}
EUVIMED