EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Atmospheric Pressure Plasma Polymerisation of D-Limonene and Its Antimicrobial Activity

Asad Masood, Naeem Ahmed iD, M F Mohd Razip Wee iD, Anuttam Patra, Ebrahim Mahmoudi iD, Kim S Siow iD

Polymers · 06.01.2023 · 15 (2) · 307

DOI: 10.3390/polym15020307 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 06.01.2023. Verfasst von Asad Masood und 5 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Microengineering and Nanoelectronics, University Kebangsaan Malaysia, Bangi 43600, Selangor, Malaysia. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National University of Malaysia, Universiti Kebangsaan Malaysia (UKM), Malaysia, PRECISE LTU.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Antibacterial coating is necessary to prevent biofilm-forming bacteria from colonising medical tools causing infection and sepsis in patients. The recent coating strategies such as immobilisation of antimicrobial materials and low-pressure plasma polymerisation may require multiple processing steps involving a high-vacuum system and time-consuming process. Some of those have limited efficacy and durability. Here, we report a rapid and one-step atmospheric pressure plasma polymerisation (APPP) of D-limonene to produce nano-thin films with hydrophobic-like properties for antibacterial applications. The influence of plasma polymerisation time on the thickness, surface characteristic, and chemical composition of the plasma-polymerised films was systematically investigated. Results showed that the nano-thin films deposited at 1 min on glass substrate are optically transparent and homogenous, with a thickness of 44.3 ± 4.8 nm, a smooth surface with an average roughness of 0.23 ± 0.02 nm. For its antimicrobial activity, the biofilm assay evaluation revealed a significant 94% decrease in the number of Escherichia coli (E. coli) compared to the control sample. More importantly, the resultant nano-thin films exhibited a potent bactericidal effect that can distort and rupture the membrane of the treated bacteria. These findings provide important insights into the development of bacteria-resistant and biocompatible coatings on the arbitrary substrate in a straightforward and cost-effective route at atmospheric pressure.

Schlagwörter

Stichwörter der Autor:innen

ASTM E2149D-limoneneE. coli bacteriaantimicrobial coatingatmospheric pressureplasma polymerisation

Autor:innen und Institutionen

  • Institute of Microengineering and Nanoelectronics, University Kebangsaan Malaysia, Bangi 43600, Selangor, Malaysia.
  • Chemistry of Interfaces Group, Luleå University of Technology, SE-97187 Luleå, Sweden.
  • Department of Chemical and Process Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi 43600, Selangor, Malaysia.

ORCID-Profile: Naeem Ahmed, M F Mohd Razip Wee, Ebrahim Mahmoudi, Kim S Siow

Förderung

  • National University of Malaysia
  • Universiti Kebangsaan Malaysia (UKM), Malaysia
  • PRECISE LTU

Zitieren

APA

Masood, A., Ahmed, N., Razip Wee, M. F. M., Patra, A., Mahmoudi, E., & Siow, K. S. (2023). Atmospheric Pressure Plasma Polymerisation of D-Limonene and Its Antimicrobial Activity. Polymers, 15(2), 307. https://doi.org/10.3390/polym15020307

Vancouver

Masood A, Ahmed N, Razip Wee MFM, Patra A, Mahmoudi E, Siow KS. Atmospheric Pressure Plasma Polymerisation of D-Limonene and Its Antimicrobial Activity. Polymers. 2023;15(2):307. doi:10.3390/polym15020307

BibTeX
@article{Masood2023,
  author = {Masood, Asad and Ahmed, Naeem and Razip Wee, M F Mohd and Patra, Anuttam and Mahmoudi, Ebrahim and Siow, Kim S},
  title = {Atmospheric Pressure Plasma Polymerisation of D-Limonene and Its Antimicrobial Activity},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {2},
  pages = {307},
  doi = {10.3390/polym15020307}
}
Kostenlos starten →