EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Blending of Low-Density Polyethylene and Poly(Butylene Succinate) (LDPE/PBS) with Polyethylene–Graft–Maleic Anhydride (PE–g–MA) as a Compatibilizer on the Phase Morphology, Mechanical and Thermal Properties

Aina Aqila Arman Alim, Azizah Baharum iD, Siti Salwa Mohammad Shirajuddin, Farah Hannan Anuar iD

Polymers · 04.01.2023 · 15 (2) · 261

DOI: 10.3390/polym15020261 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 04.01.2023. Verfasst von Aina Aqila Arman Alim und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical Sciences, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, UKM, Bangi 43600, Selangor, Malaysia. Die Arbeit wurde bisher 41-mal zitiert (Crossref) und nennt 89 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Higher Education.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

It is of significant concern that the buildup of non-biodegradable plastic waste in the environment may result in long-term issues with the environment, the economy and waste management. In this study, low-density polyethylene (LDPE) was compounded with different contents of poly(butylene succinate) (PBS) at 10–50 wt.%, to evaluate the potential of replacing commercial plastics with a biodegradable renewable polymer, PBS for packaging applications. The morphological, mechanical and thermal properties of the LDPE/PBS blends were examined in relation to the effect of polyethylene–graft–maleic anhydride (PE–g–MA) as a compatibilizer. LDPE/PBS/PE–g–MA blends were fabricated via the melt blending method using an internal mixer and then were compression molded into test samples. The presence of LDPE, PBS and PE–g–MA individually in the matrix for each blend presented physical interaction between the constituents, as shown by Fourier-transform infrared spectroscopy (FTIR). The morphology of LDPE/PBS/PE–g–MA blends showed improved compatibility and homogeneity between the LDPE matrix and PBS phase. Compatibilized LDPE/PBS blends showed an improvement in the tensile strength, with 5 phr of compatibilizer providing the optimal content. The thermal stability of LDPE/PBS blends decreased with higher PBS content and the thermal stability of compatibilized blends was higher in contrast to the uncompatibilized blends. Therefore, our research demonstrated that the partial substitution of LDPE with a biodegradable PBS and the incorporation of the PE–g–MA compatibilizer could develop an innovative blend with improved structural, mechanical and thermal properties.

Schlagwörter

Stichwörter der Autor:innen

compatibilizerlow-density polyethylenemechanical propertiesmorphologypoly (butylene succinate)polymer blendsthermal properties

Autor:innen und Institutionen

  • Department of Chemical Sciences, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, UKM, Bangi 43600, Selangor, Malaysia.
  • Polymer Research Center (PORCE), Faculty of Science and Technology, Universiti Kebangsaan Malaysia, UKM, Bangi 43600, Selangor, Malaysia.
  • Radiation Processing Technology, Malaysian Nuclear Agency, Kajang 43000, Selangor, Malaysia.

ORCID-Profile: Azizah Baharum, Farah Hannan Anuar

Förderung

  • Ministry of Higher Education

Zitieren

APA

Arman Alim, A. A., Baharum, A., Mohammad Shirajuddin, S. S., & Anuar, F. H. (2023). Blending of Low-Density Polyethylene and Poly(Butylene Succinate) (LDPE/PBS) with Polyethylene–Graft–Maleic Anhydride (PE–g–MA) as a Compatibilizer on the Phase Morphology, Mechanical and Thermal Properties. Polymers, 15(2), 261. https://doi.org/10.3390/polym15020261

Vancouver

Arman Alim AA, Baharum A, Mohammad Shirajuddin SS, Anuar FH. Blending of Low-Density Polyethylene and Poly(Butylene Succinate) (LDPE/PBS) with Polyethylene–Graft–Maleic Anhydride (PE–g–MA) as a Compatibilizer on the Phase Morphology, Mechanical and Thermal Properties. Polymers. 2023;15(2):261. doi:10.3390/polym15020261

BibTeX
@article{ArmanAlim2023,
  author = {Arman Alim, Aina Aqila and Baharum, Azizah and Mohammad Shirajuddin, Siti Salwa and Anuar, Farah Hannan},
  title = {Blending of Low-Density Polyethylene and Poly(Butylene Succinate) (LDPE/PBS) with Polyethylene–Graft–Maleic Anhydride (PE–g–MA) as a Compatibilizer on the Phase Morphology, Mechanical and Thermal Properties},
  journal = {Polymers},
  year = {2023},
  volume = {15},
  number = {2},
  pages = {261},
  doi = {10.3390/polym15020261}
}
Kostenlos starten →