EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Simulation of a Plasma Load Equivalent for Testing the Ion Cyclotron Resonance Heating System of the Kazakhstan Material Testing Tokamak (KTM)

Alexsandr Gulkin, Baurzhan Chektybayev, Anuar Kusainov, Kulan Zhenis, Dmitriy Olkhovik, Denis Zarva, Sergey Kotov, Saule Mukeneva, Yerzhan Kashikbayev, Maxat Bekmuldin, Nurzhan Mukhamedov, Andrey Mareev und 3 weitere

Plasma · 28.10.2026 · 9 (4) · 45

DOI: 10.3390/plasma9040045 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Plasma, online erschienen am 28.10.2026. Verfasst von Alexsandr Gulkin und 14 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: scientific and technical program “Scientific and Technical Support of Experimental Research on the Kazakhstani Material Science Tokamak KTM”, Agency of the Republic of Kazakhstan for Atomic Energy, Ministry of Science and Higher Education of the Russian Federation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the Kazakhstan Material Testing Tokamak (KTM), additional plasma heating will be achieved by injecting power in the ion cyclotron resonance frequency range using four identical generators, each delivering 2 MW of output power. Prior to transitioning the KTM into regular operation, it is necessary to tune these generators using a load equivalent that simulates plasma-like operating conditions. This article presents the electrodynamic design and analysis of a load equivalent capable of absorbing up to 2 MW of high-frequency power. The geometry and key parameters of the load equivalent for the additional high-frequency (HF) plasma heating system of the KTM tokamak are defined. The calculations are based on the assumption that the optimal solution is to construct the load equivalent as a resonator containing a saline aqueous solution absorber housed in a tank with a dielectric window. A dielectric material with high permittivity is proposed for use in the resonator structure. The results demonstrate that the developed load equivalent enables effective testing and tuning of the high-power generators, thus ensuring the readiness of the additional power injection system for scheduled activation on the KTM tokamak. Two plasma load equivalent (PLE) configurations were investigated for different bench-testing purposes. The large PLE was optimized for high RF power absorption in the standing-wave regime, whereas the small PLE was designed to provide a low-impedance loading condition for antenna-matching tests in preparation for plasma operation.

Förderung

  • scientific and technical program “Scientific and Technical Support of Experimental Research on the Kazakhstani Material Science Tokamak KTM”
  • Agency of the Republic of Kazakhstan for Atomic Energy
  • Ministry of Science and Higher Education of the Russian Federation

Zitieren

APA

Gulkin, A., Chektybayev, B., Kusainov, A., Zhenis, K., Olkhovik, D., Zarva, D., Kotov, S., Mukeneva, S., Kashikbayev, Y., Bekmuldin, M., Mukhamedov, N., Mareev, A., Dyachenko, V., Minaev, V., & Solokha, V. (2026). Simulation of a Plasma Load Equivalent for Testing the Ion Cyclotron Resonance Heating System of the Kazakhstan Material Testing Tokamak (KTM). Plasma, 9(4), 45. https://doi.org/10.3390/plasma9040045

Vancouver

Gulkin A, Chektybayev B, Kusainov A, Zhenis K, Olkhovik D, Zarva D, et al. Simulation of a Plasma Load Equivalent for Testing the Ion Cyclotron Resonance Heating System of the Kazakhstan Material Testing Tokamak (KTM). Plasma. 2026;9(4):45. doi:10.3390/plasma9040045

BibTeX
@article{Gulkin2026,
  author = {Gulkin, Alexsandr and Chektybayev, Baurzhan and Kusainov, Anuar and Zhenis, Kulan and Olkhovik, Dmitriy and Zarva, Denis and Kotov, Sergey and Mukeneva, Saule and Kashikbayev, Yerzhan and Bekmuldin, Maxat and Mukhamedov, Nurzhan and Mareev, Andrey and Dyachenko, Valeriy and Minaev, Vladimir and Solokha, Vladimir},
  title = {Simulation of a Plasma Load Equivalent for Testing the Ion Cyclotron Resonance Heating System of the Kazakhstan Material Testing Tokamak (KTM)},
  journal = {Plasma},
  year = {2026},
  volume = {9},
  number = {4},
  pages = {45},
  doi = {10.3390/plasma9040045}
}
Kostenlos starten →