EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Refuse-Derived Fuel (RDF) for Energy-Intensive Industries: Characterization and Potential as an Alternative Fuel Source

Evdokia Gkagkari, Michail Mouratidis, Theodoros Damartzis, Nikolaos I. Tsongidis, Emmanouil Daskalos, Charikleia A. Poravou, George Karagiannakis, George Skevis, Evanthia Kostarellou, Thomas Kaimakamis, Marios Kyrkos, Ananias Tomboulides und 6 weitere

Physchem · 04.08.2026 · 6 (3) · 51

DOI: 10.3390/physchem6030051 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Physchem, online erschienen am 04.08.2026. Verfasst von Evdokia Gkagkari und 17 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Regional Development Fund (ERDF) of the European Union and Greece.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The transition toward low-carbon cement production requires alternative fuels with improved environmental performance and resource efficiency. Refuse-Derived Fuel (RDF), produced from pre-treated non-recyclable waste streams, represents a promising alternative fuel; however, its heterogeneous and varying composition presents challenges for stable combustion and process optimization. In this study, a comprehensive physicochemical characterization of RDF was performed and compared with pet coke, a conventional, fossil cement kiln fuel. The analysis included manual sorting, particle size distribution, elemental characterization, Scanning Electron Microscopy coupled with Energy dispersive X-ray spectroscopy (SEM/EDS), X-ray Diffraction (XRD), thermogravimetric and differential scanning calorimetry (TGA/DSC), and Higher Heating Value (HHV) determination. The RDF sample exhibited a heterogeneous polymeric-mineral composition dominated by plastics, paper, textiles, and inorganic fractions. TGA revealed a broad multi-stage thermal degradation profile, while calorimetry indicated HHV of 19.2 ± 0.3 MJ/kg and ash content of 11.6 wt.%, compared with 34.57 ± 0.11 MJ/kg and 1.97 wt.% for pet coke, respectively. SEM/EDS and XRD analyses confirmed the coexistence of polymeric and mineral phases in RDF, whereas pet coke exhibited a predominantly carbonaceous and homogeneous composition. The generated dataset supports computational fluid dynamics (CFD)-based cement kiln combustion models and RDF utilization for fossil fuel substitution in the cement industry.

Förderung

  • European Regional Development Fund (ERDF) of the European Union and Greece

Zitieren

APA

Gkagkari, E., Mouratidis, M., Damartzis, T., Tsongidis, N. I., Daskalos, E., Poravou, C. A., Karagiannakis, G., Skevis, G., Kostarellou, E., Kaimakamis, T., Kyrkos, M., Tomboulides, A., Michalis, V. K., Pistofidis, N., Stroungaris, V., Poulianas, N., Tsimpanogiannis, I. N., & Asimakopoulou, A. (2026). Refuse-Derived Fuel (RDF) for Energy-Intensive Industries: Characterization and Potential as an Alternative Fuel Source. Physchem, 6(3), 51. https://doi.org/10.3390/physchem6030051

Vancouver

Gkagkari E, Mouratidis M, Damartzis T, Tsongidis NI, Daskalos E, Poravou CA, et al. Refuse-Derived Fuel (RDF) for Energy-Intensive Industries: Characterization and Potential as an Alternative Fuel Source. Physchem. 2026;6(3):51. doi:10.3390/physchem6030051

BibTeX
@article{Gkagkari2026,
  author = {Gkagkari, Evdokia and Mouratidis, Michail and Damartzis, Theodoros and Tsongidis, Nikolaos I. and Daskalos, Emmanouil and Poravou, Charikleia A. and Karagiannakis, George and Skevis, George and Kostarellou, Evanthia and Kaimakamis, Thomas and Kyrkos, Marios and Tomboulides, Ananias and Michalis, Vasileios K. and Pistofidis, Nikolaos and Stroungaris, Vasileios and Poulianas, Nikolaos and Tsimpanogiannis, Ioannis N. and Asimakopoulou, Akrivi},
  title = {Refuse-Derived Fuel (RDF) for Energy-Intensive Industries: Characterization and Potential as an Alternative Fuel Source},
  journal = {Physchem},
  year = {2026},
  volume = {6},
  number = {3},
  pages = {51},
  doi = {10.3390/physchem6030051}
}
Kostenlos starten →