Composite-Path-Based Picosecond Laser Microhole Machining and Coherent Imaging Detection
Photonics · 18.11.2026 · 13 (11) · 1085
DOI: 10.3390/photonics13111085 ↗Kurz gefasst
Fachartikel in der Zeitschrift Photonics, online erschienen am 18.11.2026. Verfasst von Yu Lu und 6 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Tianjin Science and Technology Program Project, Hebei Key Laboratory of Advanced Laser Technology and Equipment.
Abstract (Originalsprache)
Ultrafast laser microhole machining still lacks reliable taper control and on-machine geometric inspection. We combine a partitioned full-factorial design, composite-path optimization and spectral-domain optical coherence tomography (SD-OCT) on a single 355 nm, 10 ps platform for 80 μm holes in 200 μm silicon wafers. Range analysis and a second-order regression on uncoded physical variables, fitted to 448 parameter combinations with three replicate holes each, identified power, scanning speed and number of scans as significant at p < 0.001 but not repetition rate at p = 0.838, with R2 = 0.802. The resulting helical setting of 498 kHz, 15 W, 203 mm/s and 50 scans gave a mean taper of 0.90°. A composite path combining helical pre-drilling with trepanning was then applied with at 500 kHz, 15 W, 50 mm/s, 50 passes and a spiral diameter of 75 μm, and the mean taper decreased to 0.74° ± 0.05°, a reduction of 0.16° or 17.8% relative to the single helical path, which is reported as a reproducible trend. SD-OCT entrance and exit diameters were compared with an offline 3D optical profilometer, with metallurgical microscopy as an auxiliary reference. The deviations span −1.39° to 0.36° with a mean of −0.63° and an RMSE of 0.87°, a measure of inter-method agreement rather than OCT reading scatter. Since the residual method-to-method scatter exceeds the 0.16° reduction, the OCT data rank the hole geometries but do not resolve absolute taper at the 0.1° level. Although the absolute accuracy is limited by resolution and occlusion, the method has potential for online detection and closed-loop machining, providing a feasible approach for rapid machining and online detection of ultrafast laser microhole taper.
Förderung
- Tianjin Science and Technology Program Project
- Hebei Key Laboratory of Advanced Laser Technology and Equipment
Zitieren
APA
Lu, Y., Zhang, S., Ren, M., Wu, R., Liu, Y., Meng, R., & Xia, Y. (2026). Composite-Path-Based Picosecond Laser Microhole Machining and Coherent Imaging Detection. Photonics, 13(11), 1085. https://doi.org/10.3390/photonics13111085
Vancouver
Lu Y, Zhang S, Ren M, Wu R, Liu Y, Meng R, et al. Composite-Path-Based Picosecond Laser Microhole Machining and Coherent Imaging Detection. Photonics. 2026;13(11):1085. doi:10.3390/photonics13111085
BibTeX
@article{Lu2026,
author = {Lu, Yu and Zhang, Shuze and Ren, Meng and Wu, Ruilong and Liu, Yanan and Meng, Rui and Xia, Yuanqin},
title = {Composite-Path-Based Picosecond Laser Microhole Machining and Coherent Imaging Detection},
journal = {Photonics},
year = {2026},
volume = {13},
number = {11},
pages = {1085},
doi = {10.3390/photonics13111085}
}
EUVIMED