EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

First-Order Iterative Illumination Design and Simulation of Freeform Surface–Microlens Array Systems

Xiang Sun, Yuankang Chen, Xiaolong Jin, Min Xiong, Jianfeng Ru, Wenjie Xu, Yuqing Zhong

Photonics · 30.10.2026 · 13 (11) · 1032

DOI: 10.3390/photonics13111032 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Photonics, online erschienen am 30.10.2026. Verfasst von Xiang Sun und 6 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Jiangxi Provincial Natural Science Foundation, Research Startup Foundation for Faculty at East China Jiaotong University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

For light sources with a prescribed intensity distribution, the design of complex customized illumination systems is challenged by limited control degrees of freedom and nonlinear coupling in the source–target mapping. Existing mainstream methods are mostly based on optimal transport theory, in which source–target mapping and lens modeling generally involve second-order implicit partial differential equations (PDEs), leading to complex formulations and difficult solutions. To address this issue, this paper proposes a first-order iterative illumination design and simulation method based on a freeform surface–microlens array. The method adopts a two-stage “collimation–shaping” stepwise energy mapping strategy, sequentially performing beam direction normalization and irradiance distribution reconstruction. This reduces the mathematical complexity of the system model and requires only a first-order explicit iterative formulation for mathematical modeling. By virtue of the stepwise decoupling mechanism, the lens surface profiles can be directly solved through analytical mapping without relying on numerical iterative optimization. This mechanism avoids the over-constraint of degrees of freedom that readily occurs in existing methods, which must simultaneously handle beam control and irradiance reconstruction, thereby enabling complex target irradiance distributions. Simulation results show that under full-angle illumination, the system achieves an optical energy utilization efficiency of 90% and an irradiance uniformity of 87% on the target plane.

Förderung

  • National Natural Science Foundation of China
  • Jiangxi Provincial Natural Science Foundation
  • Research Startup Foundation for Faculty at East China Jiaotong University

Zitieren

APA

Sun, X., Chen, Y., Jin, X., Xiong, M., Ru, J., Xu, W., & Zhong, Y. (2026). First-Order Iterative Illumination Design and Simulation of Freeform Surface–Microlens Array Systems. Photonics, 13(11), 1032. https://doi.org/10.3390/photonics13111032

Vancouver

Sun X, Chen Y, Jin X, Xiong M, Ru J, Xu W, et al. First-Order Iterative Illumination Design and Simulation of Freeform Surface–Microlens Array Systems. Photonics. 2026;13(11):1032. doi:10.3390/photonics13111032

BibTeX
@article{Sun2026,
  author = {Sun, Xiang and Chen, Yuankang and Jin, Xiaolong and Xiong, Min and Ru, Jianfeng and Xu, Wenjie and Zhong, Yuqing},
  title = {First-Order Iterative Illumination Design and Simulation of Freeform Surface–Microlens Array Systems},
  journal = {Photonics},
  year = {2026},
  volume = {13},
  number = {11},
  pages = {1032},
  doi = {10.3390/photonics13111032}
}
Kostenlos starten →