Rib-Waveguide-Based Optical Path Design for Integrated Photonic Crystal Optomechanical Accelerometers
Photonics · 26.07.2026 · 13 (8) · 705
DOI: 10.3390/photonics13080705 ↗Kurz gefasst
Fachartikel in der Zeitschrift Photonics, online erschienen am 26.07.2026. Verfasst von Pengju Kuang und 7 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Sichuan Provincial Science and Technology Planning Program, Innovation Ability Construction Project for Sichuan Provincial Engineering Research Center of Communication Technology for Intelligent IoT.
Abstract (Originalsprache)
To prevent the collapse of strip waveguides caused by complete undercut during hydrofluoric acid (HF) release in SOI-based cavity optomechanical accelerometers, we propose using rib waveguides as the on-chip optical transmission medium. Based on a 250-nm-thick SOI wafer, we systematically analyze the photonic crystal (PhC) microcavity, rib waveguide transmission, edge coupling, mode conversion to the PhC waveguide, and evanescent coupling. The PhC microcavity has a quality factor of 2.26 × 105 at 1549.15 nm. The optimized rib waveguide (rib width 500 nm, rib height 220 nm) shows a transmission loss of 0.16 dB over 5000 μm. The rib-to-PhC waveguide coupling efficiency is 94.3% (0.25 dB loss), and a 90-μm-long tapered edge coupler achieves 65% efficiency (1.9 dB loss). The total optical path loss (including two edge couplers, rib waveguide transmission, and rib-to-PhC taper) is 4.21 dB. While maintaining optical performance comparable to strip waveguides, the rib waveguide design significantly improves post-release structural integrity at the design level. This work provides a viable optical circuit design foundation for reliable monolithically integrated cavity optomechanical accelerometers, with device fabrication and full system-level characterization planned as future work.
Förderung
- National Natural Science Foundation of China
- Sichuan Provincial Science and Technology Planning Program
- Innovation Ability Construction Project for Sichuan Provincial Engineering Research Center of Communication Technology for Intelligent IoT
Zitieren
APA
Kuang, P., Wang, C., Xian, C., Fu, N., Zhang, Y., Zhou, R., Wen, G., & Huang, Y. (2026). Rib-Waveguide-Based Optical Path Design for Integrated Photonic Crystal Optomechanical Accelerometers. Photonics, 13(8), 705. https://doi.org/10.3390/photonics13080705
Vancouver
Kuang P, Wang C, Xian C, Fu N, Zhang Y, Zhou R, et al. Rib-Waveguide-Based Optical Path Design for Integrated Photonic Crystal Optomechanical Accelerometers. Photonics. 2026;13(8):705. doi:10.3390/photonics13080705
BibTeX
@article{Kuang2026,
author = {Kuang, Pengju and Wang, Changsong and Xian, Chengwei and Fu, Ning and Zhang, Yang and Zhou, Rudi and Wen, Guangjun and Huang, Yongjun},
title = {Rib-Waveguide-Based Optical Path Design for Integrated Photonic Crystal Optomechanical Accelerometers},
journal = {Photonics},
year = {2026},
volume = {13},
number = {8},
pages = {705},
doi = {10.3390/photonics13080705}
}
EUVIMED