EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mode Discrimination in Quasi-PT-Symmetric Surface-Emitting DFB Semiconductor Lasers with Separated Gain and Radiating-Grating Sections

Haiyang Ji, Yang Chen, Guangliang Sun, Ziyuan Liao, Yunzhi Zhu, Yongtao Wu, Yufei Wang, Wanhua Zheng

Photonics · 10.06.2026 · 13 (6) · 567

DOI: 10.3390/photonics13060567 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Photonics, online erschienen am 10.06.2026. Verfasst von Haiyang Ji und 7 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Surface-emitting distributed-feedback (SE-DFB) semiconductor lasers based on second-order gratings face a fundamental triple constraint: the spatial co-location of gain, grating feedback, and vertical radiation functions limits single-mode selectivity, surface extraction efficiency, and far-field beam quality simultaneously. We propose a quasi-parity-time (PT)-symmetric SE-DFB laser with separated gain and radiating-grating sections. In this design, the electrically injected gain section and the passive second-order grating section are placed in different regions along the cavity axis, thereby separating electrical injection from surface emission without epitaxial regrowth. Coupled-mode theory and two-dimensional finite-element simulations demonstrate that the resulting longitudinal non-Hermitian gain–loss asymmetry produces spatial-overlap-dependent threshold discrimination, enabling an isolated low-threshold lasing branch that remains separated from competing cavity modes over the investigated pump-parameter range. Under the HR–AR boundary condition, the proposed design achieves a threshold gain margin of Δg=12.4cm−1, more than six times that of a conventional HR–AR DFB benchmark considered here, together with an upward surface extraction efficiency of 23.4% obtained from 2D FEM simulations. A simplified steady-state rate-equation estimate further suggests that the increased threshold margin can support strong side-mode suppression. The design imposes no regrowth requirement and is fully compatible with standard single-growth InP ridge-waveguide fabrication.

Förderung

  • National Key Research and Development Program of China

Zitieren

APA

Ji, H., Chen, Y., Sun, G., Liao, Z., Zhu, Y., Wu, Y., Wang, Y., & Zheng, W. (2026). Mode Discrimination in Quasi-PT-Symmetric Surface-Emitting DFB Semiconductor Lasers with Separated Gain and Radiating-Grating Sections. Photonics, 13(6), 567. https://doi.org/10.3390/photonics13060567

Vancouver

Ji H, Chen Y, Sun G, Liao Z, Zhu Y, Wu Y, et al. Mode Discrimination in Quasi-PT-Symmetric Surface-Emitting DFB Semiconductor Lasers with Separated Gain and Radiating-Grating Sections. Photonics. 2026;13(6):567. doi:10.3390/photonics13060567

BibTeX
@article{Ji2026,
  author = {Ji, Haiyang and Chen, Yang and Sun, Guangliang and Liao, Ziyuan and Zhu, Yunzhi and Wu, Yongtao and Wang, Yufei and Zheng, Wanhua},
  title = {Mode Discrimination in Quasi-PT-Symmetric Surface-Emitting DFB Semiconductor Lasers with Separated Gain and Radiating-Grating Sections},
  journal = {Photonics},
  year = {2026},
  volume = {13},
  number = {6},
  pages = {567},
  doi = {10.3390/photonics13060567}
}
Kostenlos starten →