EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Power Single-Mode Nanosecond Ultraviolet Fiber Laser

Guoxi Huang, Ri Yan, Wenjia Li, Fan Zhang, Tigang Ning, Li Pei

Photonics · 02.06.2026 · 13 (6) · 547

DOI: 10.3390/photonics13060547 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Photonics, online erschienen am 02.06.2026. Verfasst von Guoxi Huang und 5 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program Project of China, National Natural Science Foundation of China Key Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-power 355 nm ultraviolet (UV) lasers, leveraging their short wavelength, high photon energy, and high absorption across a broad range of materials, have become indispensable light sources for precision manufacturing, semiconductor processing, and laser direct imaging (LDI). In this paper, we demonstrate a high-power 355 nm UV laser system based on a narrow-linewidth polarization-maintaining (PM) Yb-doped fiber laser and cascaded frequency conversion. A single-frequency semiconductor laser is employed as the seed source, with its spectral linewidth broadened to 0.32 nm (full width at half maximum, FWHM) via phase modulation to suppress stimulated Brillouin scattering (SBS). Through a PM master oscillator power amplifier (MOPA) architecture, a maximum average output power of 899 W at 1064 nm is achieved with a beam quality factor of M2 = 1.12 (M2x = 1.11, M2y = 1.13). By employing lithium triborate (LiB3O5, LBO) crystals for extracavity cascaded second-harmonic generation (SHG) and sum-frequency generation (SFG), a maximum green output power of 613.7 W at 532 nm is obtained, corresponding to a SHG conversion efficiency of 68.2%, and a maximum UV output power of 227.1 W at 355 nm is achieved, with a total conversion efficiency of 25.2%. At the maximum output power, the UV beam quality factors are M2 = 1.16 (M2x = 1.24 and M2y = 1.09), and the power fluctuation is better than ±1.5% root-mean-square (RMS) over 8 h of continuous operation. These results indicate that the cascaded frequency conversion approach based on narrow-linewidth PM fiber lasers possesses the capability for further scaling to higher-power single-path high-brightness UV output and can provide high-brightness UV sources for applications such as flexible printed circuit (FPC) laser cutting, flat-panel display laser direct imaging, and semiconductor wafer scribing.

Förderung

  • National Key Research and Development Program Project of China
  • National Natural Science Foundation of China Key Project

Zitieren

APA

Huang, G., Yan, R., Li, W., Zhang, F., Ning, T., & Pei, L. (2026). High-Power Single-Mode Nanosecond Ultraviolet Fiber Laser. Photonics, 13(6), 547. https://doi.org/10.3390/photonics13060547

Vancouver

Huang G, Yan R, Li W, Zhang F, Ning T, Pei L. High-Power Single-Mode Nanosecond Ultraviolet Fiber Laser. Photonics. 2026;13(6):547. doi:10.3390/photonics13060547

BibTeX
@article{Huang2026,
  author = {Huang, Guoxi and Yan, Ri and Li, Wenjia and Zhang, Fan and Ning, Tigang and Pei, Li},
  title = {High-Power Single-Mode Nanosecond Ultraviolet Fiber Laser},
  journal = {Photonics},
  year = {2026},
  volume = {13},
  number = {6},
  pages = {547},
  doi = {10.3390/photonics13060547}
}
Kostenlos starten →