Design and Fabrication of Volume Phase Holographic Gratings for CO2 Detection: A Multi-Objective Optimization Approach
Photonics · 18.05.2026 · 13 (5) · 501
DOI: 10.3390/photonics13050501 ↗Kurz gefasst
Fachartikel in der Zeitschrift Photonics, online erschienen am 18.05.2026. Verfasst von Lei Dai und 5 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: State Key Laboratory of Applied Optics, National Natural Science Foundation of China, National Key Research and Development Program of China.
Abstract (Originalsprache)
Volume phase holographic gratings (VPHGs) are high-performance dispersive elements characterized by high diffraction efficiency and low noise. When used as dispersive components in imaging spectrometers for CO2 detection, they can significantly enhance instrument performance, detection capability, and measurement accuracy. However, for short-wave infrared (SWIR) applications requiring high dispersion and operational efficiency, traditional design approaches struggle to effectively balance the trade-offs among multidimensional diffraction performance metrics, resulting in low optimization efficiency. Furthermore, as spectrometers require dispersive elements, established fabrication methods lack robust methodologies for producing large-area VPHGs. To address these gaps, we developed both a design approach and a fabrication process for VPH gratings tailored to CO2 detection. On the design front, we propose a novel method that integrates a multi-objective simulated annealing optimization algorithm with Kogelnik’s coupled-wave theory. The optimized gratings achieve diffraction efficiencies of 95.35% (TE polarization) and 82.21% (TM polarization) across the target spectral range, with polarization sensitivity maintained below 6.57%. For fabrication, we developed holographic plate fabrication via a blade-coating technique coupled with an optimized aging protocol. A medium-to-large aperture holographic recording and exposure system with a wavefront error better than λ/25 RMS was developed. Post-processing conditions were systematically optimized based on experimental diffraction efficiency measurements, enabling the successful fabrication of VPHGs. It is explicitly noted that the experimental validation of the fabricated VPHGs is limited to the 1.620–1.630 μm wavelength range, while the full target design range of 1.620–1.650 μm has not been experimentally verified in this work. This work provides a valuable reference for the selection of dispersive elements for next-generation CO2 detection satellites. The designed gratings fully meet application requirements, while the established fabrication process lays a solid foundation for the production of high-performance VPHGs.
Förderung
- State Key Laboratory of Applied Optics
- National Natural Science Foundation of China
- National Key Research and Development Program of China
Zitieren
APA
Dai, L., Lin, C., Ji, Z., Fu, Y., Wang, S., & Zheng, Y. (2026). Design and Fabrication of Volume Phase Holographic Gratings for CO2 Detection: A Multi-Objective Optimization Approach. Photonics, 13(5), 501. https://doi.org/10.3390/photonics13050501
Vancouver
Dai L, Lin C, Ji Z, Fu Y, Wang S, Zheng Y. Design and Fabrication of Volume Phase Holographic Gratings for CO2 Detection: A Multi-Objective Optimization Approach. Photonics. 2026;13(5):501. doi:10.3390/photonics13050501
BibTeX
@article{Dai2026,
author = {Dai, Lei and Lin, Chao and Ji, Zhenhua and Fu, Yang and Wang, Shuo and Zheng, Yuquan},
title = {Design and Fabrication of Volume Phase Holographic Gratings for CO2 Detection: A Multi-Objective Optimization Approach},
journal = {Photonics},
year = {2026},
volume = {13},
number = {5},
pages = {501},
doi = {10.3390/photonics13050501}
}
EUVIMED