EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dual-Wavelength Optical Triangulation System for Focus Metrology in 350 nm Lithography

Hengrui Guan, Xuefeng Lei, Yuheng Chu, Xinxin Zhao, Dapeng Kuang, Maoxin Song, Mingchun Ling, Jin Hong

Photonics · 12.05.2026 · 13 (5) · 481

DOI: 10.3390/photonics13050481 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Photonics, online erschienen am 12.05.2026. Verfasst von Hengrui Guan und 7 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thin-film interference in photoresist stacks can become a significant source of uncertainty in lithographic focus metrology, particularly when high measurement stability is required. To evaluate this effect, a Fresnel-based multilayer reflection model is used to analyze the optical response of the resist stack and to guide the selection of dual-wavelength illumination. On this basis, a dual-wavelength optical triangulation system is developed for focus metrology in 350 nm lithography, with signal acquisition performed by a linear charge-coupled device (LCCD). Rather than improving precision by reducing detector pitch, the system employs a two-stage sub-pixel localization strategy in which template matching provides coarse spot localization and weighted centroid interpolation refines the final position within localized calculation windows, keeping the computational cost manageable. A covariance-based uncertainty analysis predicts a total root-mean-square uncertainty of 27.23 nm. Prototype experiments were performed on a bare silicon wafer to establish the intrinsic performance of the instrument before introducing process-dependent optical effects. Under these conditions, the system achieved a vertical resolution of 10 nm, a repeatability of 35 nm, and a stability of 13.16 nm. The additional uncertainty expected under resist-coated-wafer conditions was assessed separately through the thin-film model. These results verify the baseline capability of the proposed system and support the feasibility of the dual-wavelength strategy for focus metrology in 350 nm lithography.

Zitieren

APA

Guan, H., Lei, X., Chu, Y., Zhao, X., Kuang, D., Song, M., Ling, M., & Hong, J. (2026). Dual-Wavelength Optical Triangulation System for Focus Metrology in 350 nm Lithography. Photonics, 13(5), 481. https://doi.org/10.3390/photonics13050481

Vancouver

Guan H, Lei X, Chu Y, Zhao X, Kuang D, Song M, et al. Dual-Wavelength Optical Triangulation System for Focus Metrology in 350 nm Lithography. Photonics. 2026;13(5):481. doi:10.3390/photonics13050481

BibTeX
@article{Guan2026,
  author = {Guan, Hengrui and Lei, Xuefeng and Chu, Yuheng and Zhao, Xinxin and Kuang, Dapeng and Song, Maoxin and Ling, Mingchun and Hong, Jin},
  title = {Dual-Wavelength Optical Triangulation System for Focus Metrology in 350 nm Lithography},
  journal = {Photonics},
  year = {2026},
  volume = {13},
  number = {5},
  pages = {481},
  doi = {10.3390/photonics13050481}
}
Kostenlos starten →