EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Optimization of a Broadband Polarization-Insensitive 90° Optical Hybrid in Double-Strip Silicon Nitride Waveguides

Rui Meng, Yan Fan, Sitong Liu, Haoran Wang, Ziyang Xiong, Hao Deng, Liu Li, Junpeng Lu, Zhenhua Ni, Tong Lin

Photonics · 10.04.2026 · 13 (4) · 364

DOI: 10.3390/photonics13040364 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Photonics, online erschienen am 10.04.2026. Verfasst von Rui Meng und 9 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, State Key Laboratory of Infrared Physics.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Coherent optical communication serves as the backbone of long-haul, high-capacity optical networks, where polarization-insensitive 90° optical hybrids (OHs) are crucial for system simplification and robustness. This work presents a polarization-insensitive 90° OH based on asymmetric double-strip silicon nitride waveguides, designed for dual-polarization quadrature phase-shift keying (DP-QPSK) systems. The device consists of a cascaded polarization-insensitive structure incorporating one 1 × 2 and three 2 × 2 multimode interference (MMI) couplers, interconnected by four 90° bent waveguides. Optimized via 3D finite-difference time-domain (FDTD) simulations, the 1 × 2 MMI coupler exhibits insertion losses below 0.06 dB (TE) and 0.09 dB (TM), while each 2 × 2 MMI coupler shows insertion losses under 0.2/0.4 dB, amplitude imbalance below 0.05/0.18 dB, and phase error within ±0.5°/±1.5° for the TE/TM modes, respectively. Based on these components, the full device achieves polarization-insensitive operation across a 100 nm bandwidth (1500–1600 nm), with a phase error within ±1°, insertion loss below 0.3 dB (TE) and 0.5 dB (TM), and common-mode rejection ratio better than −40 dB (TE) and −30 dB (TM). Furthermore, the design demonstrates high fabrication tolerance, maintaining performance under manufacturing deviations of ±2 μm in MMI length and ±20 nm in waveguide spacing. This work provides a promising polarization-insensitive OH design and a viable route toward cost-effective mass production of next-generation high-speed coherent systems.

Förderung

  • National Key Research and Development Program of China
  • National Natural Science Foundation of China
  • State Key Laboratory of Infrared Physics
  • Frontier Technologies R&D Program of Jiangsu

Zitieren

APA

Meng, R., Fan, Y., Liu, S., Wang, H., Xiong, Z., Deng, H., Li, L., Lu, J., Ni, Z., & Lin, T. (2026). Design and Optimization of a Broadband Polarization-Insensitive 90° Optical Hybrid in Double-Strip Silicon Nitride Waveguides. Photonics, 13(4), 364. https://doi.org/10.3390/photonics13040364

Vancouver

Meng R, Fan Y, Liu S, Wang H, Xiong Z, Deng H, et al. Design and Optimization of a Broadband Polarization-Insensitive 90° Optical Hybrid in Double-Strip Silicon Nitride Waveguides. Photonics. 2026;13(4):364. doi:10.3390/photonics13040364

BibTeX
@article{Meng2026,
  author = {Meng, Rui and Fan, Yan and Liu, Sitong and Wang, Haoran and Xiong, Ziyang and Deng, Hao and Li, Liu and Lu, Junpeng and Ni, Zhenhua and Lin, Tong},
  title = {Design and Optimization of a Broadband Polarization-Insensitive 90° Optical Hybrid in Double-Strip Silicon Nitride Waveguides},
  journal = {Photonics},
  year = {2026},
  volume = {13},
  number = {4},
  pages = {364},
  doi = {10.3390/photonics13040364}
}
Kostenlos starten →