Differentiable Automated Design of Automotive Freeform AR-HUD Optical Systems
Photonics · 30.03.2026 · 13 (4) · 337
DOI: 10.3390/photonics13040337 ↗Kurz gefasst
Fachartikel in der Zeitschrift Photonics, online erschienen am 30.03.2026. Verfasst von Chengxiang Fan und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Plan of China.
Abstract (Originalsprache)
The automotive augmented reality head-up display (AR-HUD) system projects critical driving information directly into the driver’s line of sight, enhancing driving safety, user experience, and navigation efficiency. However, due to the intrinsic asymmetry of vehicle windshields, existing optical configurations are difficult to use as effective design starting points. The asymmetric transmission region of the windshield causes the AR-HUD optical system to deviate significantly from the YOZ plane, increasing the complexity of system design and optimization. To address these challenges, this paper proposes an automated design method for automotive AR-HUD optical systems. Given the windshield geometry and system design specifications, a normal-guided iterative construction method is first employed to generate a high-performance initial optical structure with low distortion. Subsequently, differentiable ray tracing combined with optimization algorithms is employed to further improve system performance. Based on the proposed method, an AR-HUD optical system with a 130 mm × 50 mm eye-box and a 13° × 4° field of view was designed. The design results indicate that the maximum optical distortion is 0.51%. At five sampled eye positions within the eye-box, the MTF exceeds 0.5 at the spatial frequency of 6 lp/mm, and the dynamic distortion remains below 5.36′. Finally, a complete experimental prototype was established, and the experimental results verified the feasibility and effectiveness of the proposed automated design method.
Förderung
- National Key R&D Plan of China
Zitieren
APA
Fan, C., Zheng, J., Wan, X., Wei, X., & Nie, Y. (2026). Differentiable Automated Design of Automotive Freeform AR-HUD Optical Systems. Photonics, 13(4), 337. https://doi.org/10.3390/photonics13040337
Vancouver
Fan C, Zheng J, Wan X, Wei X, Nie Y. Differentiable Automated Design of Automotive Freeform AR-HUD Optical Systems. Photonics. 2026;13(4):337. doi:10.3390/photonics13040337
BibTeX
@article{Fan2026,
author = {Fan, Chengxiang and Zheng, Jihong and Wan, Xinjun and Wei, Xiaoxiao and Nie, Yunfeng},
title = {Differentiable Automated Design of Automotive Freeform AR-HUD Optical Systems},
journal = {Photonics},
year = {2026},
volume = {13},
number = {4},
pages = {337},
doi = {10.3390/photonics13040337}
}
EUVIMED