EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

MOCVD Regrowth and Surface Morphology Study of Distributed Bragg Reflector Structures on Photonic Crystal Layers

Yan Zhang, Yao Xiao, Zhicheng Zhang, Chen Luo, Chongxi Zhong, Longji Li, Yang Yang, Mu Song, Wu Zhao, Liujing Li, Shunfeng Li, Guoliang Deng und 2 weitere

Photonics · 10.03.2026 · 13 (3) · 262

DOI: 10.3390/photonics13030262 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Photonics, online erschienen am 10.03.2026. Verfasst von Yan Zhang und 13 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jiangsu Province Science and Technology Achievement Transformation Special Fund.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Photonic-crystal surface-emitting lasers (PCSELs) are a new type of semiconductor laser with the potential for high-power output and high-beam-quality operation. Integrating a distributed Bragg reflector (DBR) into PCSELs can significantly enhance device performance. However, the growth of high-aluminum-content DBRs on photonic crystal layers with buried air holes presents two major challenges. First, the low mobility of aluminum atoms increases the propagation of surface roughness from the substrate into the DBR, increasing defect density. Second, the high growth temperatures required for DBR growth can deform the thermally unstable air holes. In this work, we investigated a metal–organic chemical vapor deposition (MOCVD) regrowth process for fabricating DBRs on PCSELs. By adjusting the epitaxial growth temperature and V/III ratio, we effectively controlled the diffusion of adatoms on both the sample surface and inside the holes. As a result, the root mean square (RMS) surface roughness decreased by ~96%, and uniform buried air holes were obtained, with a filling factor of ~ 18.8% and a depth of ~ 270 nm, without significant deformation. Finally, we fabricated a PCSEL device with a DBR structure, exhibiting a beam divergence angle of ~ 0.5° and a peak power of about 0.86 W. This study provides a key process solution for the development of PCSELs with high-quality DBR structures, enabling further improvement in optical output performance.

Förderung

  • Jiangsu Province Science and Technology Achievement Transformation Special Fund

Zitieren

APA

Zhang, Y., Xiao, Y., Zhang, Z., Luo, C., Zhong, C., Li, L., Yang, Y., Song, M., Zhao, W., Li, L., Li, S., Deng, G., Zhou, S., & Wang, J. (2026). MOCVD Regrowth and Surface Morphology Study of Distributed Bragg Reflector Structures on Photonic Crystal Layers. Photonics, 13(3), 262. https://doi.org/10.3390/photonics13030262

Vancouver

Zhang Y, Xiao Y, Zhang Z, Luo C, Zhong C, Li L, et al. MOCVD Regrowth and Surface Morphology Study of Distributed Bragg Reflector Structures on Photonic Crystal Layers. Photonics. 2026;13(3):262. doi:10.3390/photonics13030262

BibTeX
@article{Zhang2026,
  author = {Zhang, Yan and Xiao, Yao and Zhang, Zhicheng and Luo, Chen and Zhong, Chongxi and Li, Longji and Yang, Yang and Song, Mu and Zhao, Wu and Li, Liujing and Li, Shunfeng and Deng, Guoliang and Zhou, Shouhuan and Wang, Jun},
  title = {MOCVD Regrowth and Surface Morphology Study of Distributed Bragg Reflector Structures on Photonic Crystal Layers},
  journal = {Photonics},
  year = {2026},
  volume = {13},
  number = {3},
  pages = {262},
  doi = {10.3390/photonics13030262}
}
Kostenlos starten →