EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Approach for Spectrum Extraction Based on Canny Operator-Enabled Adaptive Edge Extraction and Centroid Localization

Ao Li, Xinlan Ge, Zeyu Gao, Qiang Yuan, Yong Chen, Chao Yang, Licheng Zhu, Shiqing Ma, Shuai Wang, Ping Yang

Photonics · 10.02.2026 · 13 (2) · 169

DOI: 10.3390/photonics13020169 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Photonics, online erschienen am 10.02.2026. Verfasst von Ao Li und 9 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In adaptive optics systems, high spatial resolution detection is a core prerequisite for achieving accurate wavefront correction. High spatial resolution wavefront measurement based on the traditional Shack-Hartmann technique is limited by the density of the microlens array. In contrast, off-axis digital holography technology is applied in wavefront measurement systems of adaptive optics systems due to its advantages of high spatial resolution, non-contact measurement, and full-field measurement. However, during the demodulation of its interference fringes, the accurate extraction of the complex amplitude of the +1st-order diffraction order directly determines the precision of wavefront reconstruction. Traditional frequency-domain filtering methods suffer from drawbacks such as reliance on manual threshold setting, poor adaptability to irregular spectra, and localization deviations caused by multi-region interference, making it difficult to meet the dynamic application requirements of adaptive optics. To address these issues, this study proposes a spectrum extraction method based on the Canny operator for adaptive edge extraction and centroid localization. The method first locks the rough range of the +1st-order spectrum through multi-stage peak screening, then achieves complete segmentation of spectrum spots by combining adaptive histogram equalization with edge closing and filling, resolves centroid indexing errors via maximum connected component screening, and ultimately accomplishes accurate extraction through Gaussian window filtering. Simulation experimental results show that, in comparison with two classical spectrum filtering methods, the centroid estimation error of the proposed method remains below 0.245 pixels under different noise intensity conditions. Moreover, the root mean square error of the residual wavefront corresponding to the reconstructed wavefront of the proposed method is reduced by 89.0% and 87.2% compared with those of the two classical methods, respectively. We further carried out measurement experiments based on a self-developed atmospheric turbulence test bench. The experimental results demonstrate that the proposed method exhibits higher-precision spectral centroid localization capability, which provides a reliable technical support for the high-precision measurement of dynamic distortion induced by atmospheric turbulence.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, A., Ge, X., Gao, Z., Yuan, Q., Chen, Y., Yang, C., Zhu, L., Ma, S., Wang, S., & Yang, P. (2026). An Approach for Spectrum Extraction Based on Canny Operator-Enabled Adaptive Edge Extraction and Centroid Localization. Photonics, 13(2), 169. https://doi.org/10.3390/photonics13020169

Vancouver

Li A, Ge X, Gao Z, Yuan Q, Chen Y, Yang C, et al. An Approach for Spectrum Extraction Based on Canny Operator-Enabled Adaptive Edge Extraction and Centroid Localization. Photonics. 2026;13(2):169. doi:10.3390/photonics13020169

BibTeX
@article{Li2026,
  author = {Li, Ao and Ge, Xinlan and Gao, Zeyu and Yuan, Qiang and Chen, Yong and Yang, Chao and Zhu, Licheng and Ma, Shiqing and Wang, Shuai and Yang, Ping},
  title = {An Approach for Spectrum Extraction Based on Canny Operator-Enabled Adaptive Edge Extraction and Centroid Localization},
  journal = {Photonics},
  year = {2026},
  volume = {13},
  number = {2},
  pages = {169},
  doi = {10.3390/photonics13020169}
}
Kostenlos starten →